Jump to content
SAU Community

Boostworx/Ben's 10sec JZA70 Supra... written-off :(

whatsisname

By whatsisname,
in South Australia

 Share

Recommended Posts

whatsisname Grand Master

whatsisname

Posted
Posted

Ben's 'Boostworx' sponsored 10sec Supra came to a sad end late today :) Thankfully Ben is ok!!!

This is all second hand info, so don't take it ALL as gospel...

A Dawoo of some description did an illegal U-turn causing Ben to take evasive action to avoid hitting it! The Supra clipped the gutter in the process and this caused it to spin. Ben hit a stobie pole just forward of the front door area. Shaun said had it hit at the door... Ben would've been in BIG trouble :D

As the other car wasn't actually involved in the crash they left the scene, giving the finger and swearing! If anyone has any info that leads to the ID'ing of said Dawoo then pls let me know.

Most of the drivetrain is suppose to be still ok and will hopefully make it back into a new chassis?

The new engine hadn't even been fully run-in yet :D Early trial tuning saw 360rwkw on 16psi at 5500rpm. They intend to use closer to 7000+/-rpm and 20+psi. I'm guessing high 400's to 500rwkw will be on the cards, as the turbo wasn't even into the start of it efficency range.

COPYME Collaborator

COPYME

Posted
Posted
Ben's 'Boostworx' sponsored 10sec Supra came to a sad end late today :) Thankfully Ben is ok!!!  

This is all second hand info, so don't take it ALL as gospel...

A Dawoo of some description did an illegal U-turn causing Ben to take evasive action to avoid hitting it! The Supra clipped the gutter in the process and this caused it to spin. Ben hit a stobie pole just forward of the front door area. Shaun said had it hit at the door... Ben would've been in BIG trouble :D    

As the other car wasn't actually involved in the crash they left the scene, giving the finger and swearing! If anyone has any info that leads to the ID'ing of said Dawoo then pls let me know.  

Most of the drivetrain is suppose to be still ok and will hopefully make it back into a new chassis?  

The new engine hadn't even been fully run-in yet :D  Early trial tuning saw 360rwkw on 16psi at 5500rpm. They intend to use closer to 7000+/-rpm and 20+psi. I'm guessing high 400's to 500rwkw will be on the cards, as the turbo wasn't even into the start of it efficency range.

So where did this happen? Post a pic?! This isnt going to be like R34 GTR crashed in adelaide is it?

whatsisname Grand Master

whatsisname

Posted
  • Author
Posted

Not sure on the location?

I VERY much doubt it will be like the "GT-R crashed" thread, as Ben's Supra is very well known. Not much chance of mistaking it. It has been a ZOOM cover car and was a regular AIR competitor. It also made over 420rwkw at Autosalon one year.

The new motor has BIG potential! Hopefully it'll find a new home sooner rather than later.

Revhead Grand Master

Revhead

Posted
Posted

I can't believe the farkwits in the Daewoo didn't at least check that he was OK... :) I hope the pricks get caught. I hate it when someone in a nice car is automatically blamed (he will be) for an accident caused by an idiot like this. Sort of makes you wish that he'd run up the arse of the Daewoo - the friggen retard in the buzzbox would get their just desserts, and Ben might have actually gotten some form of compensation...

Rob Collaborator

Rob

Posted
Posted

OMG that is on ***in bad!, I can not believe the other car did a runner.... I hate fugging Daewoo's!!!!!!!

Hopefully he will get it all put into an other chassis, and get it back on the road.

If only my Supra (same shape) was as fast as his.... such a beast of a car.

Did I mention I hate Daewoo's!

COPYME Collaborator

COPYME

Posted
Posted
OMG that is on ***in bad!, I can not believe the other car did a runner.... I hate fugging Daewoo's!!!!!!!

Hopefully he will get it all put into an other chassis, and get it back on the road.

If only my Supra (same shape) was as fast as his.... such a beast of a car.

Did I mention I hate Daewoo's!

Daewoos are Korean Crap! :throwup: Still a very good thing that no-one got hurt! Very frustrating all the same though

whatsisname Grand Master

whatsisname

Posted
  • Author
Posted

Revhead (Marc) you hit the nail on the head mate! Ben will undoubtedly have the finger of blame pointed at HIM, for no other reason than the type of car he drives, or drove... in this case :)

The cost of repairing, or replacing, the s/pole and downed power lines will add up to quite a bit ;)

It could've been a LOT worse I guess? Ben is ok and the new engine combo should be fine. Looking at that photo it shows the rear end is still fine too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...