Jump to content
SAU Community

Recommended Posts

Ben's 'Boostworx' sponsored 10sec Supra came to a sad end late today :) Thankfully Ben is ok!!!

This is all second hand info, so don't take it ALL as gospel...

A Dawoo of some description did an illegal U-turn causing Ben to take evasive action to avoid hitting it! The Supra clipped the gutter in the process and this caused it to spin. Ben hit a stobie pole just forward of the front door area. Shaun said had it hit at the door... Ben would've been in BIG trouble :D

As the other car wasn't actually involved in the crash they left the scene, giving the finger and swearing! If anyone has any info that leads to the ID'ing of said Dawoo then pls let me know.

Most of the drivetrain is suppose to be still ok and will hopefully make it back into a new chassis?

The new engine hadn't even been fully run-in yet :D Early trial tuning saw 360rwkw on 16psi at 5500rpm. They intend to use closer to 7000+/-rpm and 20+psi. I'm guessing high 400's to 500rwkw will be on the cards, as the turbo wasn't even into the start of it efficency range.

Ben's 'Boostworx' sponsored 10sec Supra came to a sad end late today :) Thankfully Ben is ok!!!  

This is all second hand info, so don't take it ALL as gospel...

A Dawoo of some description did an illegal U-turn causing Ben to take evasive action to avoid hitting it! The Supra clipped the gutter in the process and this caused it to spin. Ben hit a stobie pole just forward of the front door area. Shaun said had it hit at the door... Ben would've been in BIG trouble :D    

As the other car wasn't actually involved in the crash they left the scene, giving the finger and swearing! If anyone has any info that leads to the ID'ing of said Dawoo then pls let me know.  

Most of the drivetrain is suppose to be still ok and will hopefully make it back into a new chassis?  

The new engine hadn't even been fully run-in yet :D  Early trial tuning saw 360rwkw on 16psi at 5500rpm. They intend to use closer to 7000+/-rpm and 20+psi. I'm guessing high 400's to 500rwkw will be on the cards, as the turbo wasn't even into the start of it efficency range.

So where did this happen? Post a pic?! This isnt going to be like R34 GTR crashed in adelaide is it?

Not sure on the location?

I VERY much doubt it will be like the "GT-R crashed" thread, as Ben's Supra is very well known. Not much chance of mistaking it. It has been a ZOOM cover car and was a regular AIR competitor. It also made over 420rwkw at Autosalon one year.

The new motor has BIG potential! Hopefully it'll find a new home sooner rather than later.

I can't believe the farkwits in the Daewoo didn't at least check that he was OK... :) I hope the pricks get caught. I hate it when someone in a nice car is automatically blamed (he will be) for an accident caused by an idiot like this. Sort of makes you wish that he'd run up the arse of the Daewoo - the friggen retard in the buzzbox would get their just desserts, and Ben might have actually gotten some form of compensation...

OMG that is on ***in bad!, I can not believe the other car did a runner.... I hate fugging Daewoo's!!!!!!!

Hopefully he will get it all put into an other chassis, and get it back on the road.

If only my Supra (same shape) was as fast as his.... such a beast of a car.

Did I mention I hate Daewoo's!

OMG that is on ***in bad!, I can not believe the other car did a runner.... I hate fugging Daewoo's!!!!!!!

Hopefully he will get it all put into an other chassis, and get it back on the road.

If only my Supra (same shape) was as fast as his.... such a beast of a car.

Did I mention I hate Daewoo's!

Daewoos are Korean Crap! :throwup: Still a very good thing that no-one got hurt! Very frustrating all the same though

Revhead (Marc) you hit the nail on the head mate! Ben will undoubtedly have the finger of blame pointed at HIM, for no other reason than the type of car he drives, or drove... in this case :)

The cost of repairing, or replacing, the s/pole and downed power lines will add up to quite a bit ;)

It could've been a LOT worse I guess? Ben is ok and the new engine combo should be fine. Looking at that photo it shows the rear end is still fine too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...