Jump to content
SAU Community

Recommended Posts

its lowered alot yeah, what brand middle muffler, i dont wanna buy some crap muffler, alot of people have different idea of whats loud and whats not, but ive seen and heard alot of skylines around and they have some nice RB sound to them without being too bad, i could barely drive it to the exhaust shops, still got a headache

Might need to raise the car i think, discovered my dump is practically touching the underbody, :( another job..

So i got a rear muffler 3inch Xforce put on and its quite acceptable noise wise now :)

but the exhaust guy thinks theres a restrictor inside the hotdog resonator too, he showed me a resonator that he had and it was basically blocked on the inside with some insertion and spiraled wire around it,

he says this because he expected the car to sound alot more throaty, its suprisingly quiet,

so is this a common thing for hotdog resonators to have silencers in them on a Jap exhaust??????????

Edited by SliverS2

i would of never suspected this at all, looks like another thing to replace...

Does it matter what resonator you get or will a certain brand give it a better RB note?????

Looking at a MagnaFlow resonator from Rocket industries , $132 , the body is 6inch long and 6inch round, 3 1/2 inch

Would that be a good thing or not?

Edited by SliverS2

As long as it is 3.5inch through with no restriction it will be fine. The worst part about the restrictor in the resi its not something you can really check unless you chop it off and by that time you might aswell change it if you've chopped it off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...