Jump to content
SAU Community

Recommended Posts

Hi guys,

Recently i've been encountering a few issues with my 97 r33. When pulling up to a light or coming to a stop (or even jst idling for that matter) my cars rpm fluctuates up and down ever so slightly. Sometimes the rpm dips to low enough and the engine cuts off. The problem appears to be getting worse. Now the car feels jerky and sluggish to drive. Also the cars eats a lot more fuel too if that helps. Please help! :(

Thnx, Simon

The car also stalls VERY easily when driving around parking lots!

Edited by EarthShore
Link to comment
https://www.sau.com.au/forums/topic/399970-idle-and-stalling-issues/
Share on other sites

  • 2 weeks later...

I have the same problem with my r32 I've been told that it can be coz of the BOV I also have problems when the car is dead cold (first start up) is hard to start and have to use throttle to get it to idle once it is going tho its all good could this be connected ??

that could be your tune^^^ i.e. never tuned for cold start.

Simon, i defintatly say its your BOV's, particualy if you are runing a/m atmo with afm's (no map tune). Stock BOV's are the best anyhow. There are usually a few GTR (compatible with the gtst) ones floating in the classified for ~$50.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...