Jump to content
SAU Community

18Psi On Stock Injectors With A Rb25 Neo De+T

hks33

By hks33,
in Engines & Forced Induction

 Share

Recommended Posts

hks33 Experienced

hks33

Posted
  • Author
Posted

Hi Phil,

Your attitude towards the situation was very unprofessional if you honestly ask me and your intentions at the time were to make me feel like a complete moron. I'am not here to start a debate but I will not tolerate being made out as a fool when clearly I'am not. Modifications which you had spoken of were a RB25de+t block with a GT35r ebay turbo running 18psi on OEM injectors. Nothing was mentioned about a fuel pump, adjustable fuel regulator nor the nistune or Z32 AFM. I took into account 18 psi would require such supporting modifications which you have listed in this thread in which we are discussing currently.

Word for word you had stated the car had been running "18psi for 2 years and still going strong". All I had mentioned was that the psi which you and the owner had stated the car was running on the OEM injectors was not possible. The injectors would be well past there 100% duty the way it came across to me and fellow friends/forum members.

You had turned the whole thread around on me abusing me with various profanity's which I prefer not to mention as I said this isn't a debate I'am just here to clear up an issue.

My words may appear as slanderous bullshit to you here but I do remember you telling me that these forums were a bunch of bullshit and have any of them personally tryed what was mentioned. None of my friends on the online social networking site online had inboxed you saying I'am what your accusing them of saying. Please keep your comments to yourself if they intend to come across in a bad way.

I'm afraid you are the immature one by resorting to profanity's and turning the whole conversation and persons reading it against me then accusing people which I had spoken to earlier of saying the complete opposite.

Everyone knew it wasn't possible with the modifications listed my friends along with fellow forumers. So please stop being naive and clarify your statement before making accusations next time.

Best regards Chris.

The WOR57 Collaborator

The WOR57

Posted
Posted

Above just explains exactly why I got annoyed and defensive, you did not care to ask what supporting mods were used - you simply went on your rant, and made statuses etc abusing my business without knowing the facts, nor did you care to ask....

And yes the "GT35r" was very reminiscent of the old ebay T70/T04E style turbo to that person in question - hence the piss poor power figure on big boost

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...