Jump to content
SAU Community

Fs: Full Rebuilt Rb26 Block & Hks Dump Pipes

destrukshn
 Share

Recommended Posts

destrukshn Rising Star

destrukshn

Posted
Posted (edited)

Hi All,

I've got a full rebuilt RB26 block with a completely balanced crank from a R34 GT-R, CP pistons 87mm, Eagle Rods with ARP rod bolts fitted a Tomei Oil Restrictor on it too for sale. Comes with all new welsh plugs and has been painted to look new.

Engine has made 441awkw @ 9000rpm without any problems. Has been about 5000km on it since the rebuild. Reason for selling is i've upgraded to RB30 and no longer need this block. The block has been revved to 9000rpm each time without any problems at all. Good for someone with a set of -5s and want to push it to the limits. Willing to send interstate via courier.

I've got all the pictures of the rebuild and the block now for those who are interested please send me a PM. Price is $2750 ono.

Also have a pair of HKS Dump pipes also. These have about 10000km on life on them and is in perfect condition. $320ono

Cheers,

Gordon

Edited by destrukshn
polishstorm Mentor

polishstorm

Posted
Posted

I just recently got burnt on buying a block from interstate so want to make sure this is what it is advertised as. Can the workshop provide the receipts for the part bought for the rebuild? Also what oil pump is it running?

Can you pm me pics of the build?

Thanks

destrukshn Rising Star

destrukshn

Posted
  • Author
Posted (edited)

Fair enough mate. The parts were bought from the US by me and as I said my dad built it himself so I cant provide you any receipts. I can send you all our rebuild pictures though to see if you're happy with it from the original packages of what was bought and the crank balanced etc. I kept a rebuild diary so I have pictures of everything. It is running a Tomei oil pump which isnt included in the sale of the block.

PM your email and will send you pictures of the build.

Edited by destrukshn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • soviet_merlin
      R32 GTST - 600KW+ RB28/CD009 Build

      By soviet_merlin · Posted

      What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...