Jump to content
SAU Community

Recommended Posts

Hi all,

I'm just seeing if anyone is interested in an R32 GTR. I'm the first owner in Australia and have had the car for about 4 years. There's a couple of body issues that need tidying up and it could do with a tune (I have the standard computer on it, but have a PFC with plug in boost controller to go on), but I'm wanting to sell it to get rid of debts.

Car is white with white 3-piece mags (really light weight). It's missing the rear B-C Pillar trims (old brittle plastic broke but can arrange new ones from Nissan) and has a tear in drivers seat fabric.The rest of the interior is pretty good, except a couple of screw holes where gauges have previously been mounted.

Bodywork issues: Front bar is looking a little worse for wear, (have been quoted $300 to repair and primer). Rear quarters have pimples where something floating around in the boot and dinged them out. Otherwise the body generally could do with a good wash/cut and polish, or respray if you're that way inclined.

I will PM/email pics if interested. I'm looking for about 13.5k, but am open to serious offers.

Link to comment
https://www.sau.com.au/forums/topic/401221-eoi-1992-r32-gtr/
Share on other sites

Perhaps I should point out the good things as well.

New front tyres, rears have good tread

Tein coilovers all-round (not sure what type, they came with the car)

550cc injectors

Apexi pods on RB25 AFM's

Mine's 320km/h speedo (Km's show 76k, but estimate it's done about 125km as timing belt was done just before I bought it)

CD/MP3 player, new front speakers and speaker wiring.

Apexi Power FC, hand controller and boost controller

Oil filter relocation kit and oil cooler.

Yellow Jacket coil packs and replaced wiring harness

Hasemi 17x9" rims (Hasemi was one of the R32 JGTC drivers, wheels are manufactured under licence by SSR)

ORC (Ogura Racing Clutch) 709D twin plate dampered clutch

52mm Radiator, replaced top and bottom hoses.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...