Jump to content
SAU Community

Recommended Posts

Yea been reading for awhile, just had little input, my F&F memory was failing me haha..

http://www.skylinesaustralia.com/forums/topic/393468-volk-racing-te37sl-wheels-with-or-without-stickers/page__st__20

Check my post in there regarding wheel stickers.. getting pretty keen for gold ones! let me know what you guys think?

We will fix the F&F problem!! Lol

Checking link now

ah thats good then.

yeah cause rewireable fuses are illegal now, if you touch a circuit that has it you have to redo everything.

i mean i could probably do it but i wouldnt be happy about it lololol. plus it may hurt your pocket a little. idk, maybe 500-1000 with everything done by me, including your garage. but thats a fair guess

hmm... dunno ant,

i kinda see it as, are you doing black on yellow or yellow on black, adding yellow when your trying to put more black in could look a bit odd?

could be a bit over the top you know?

though if i saw it id probably like it so idk. see what others think i guess.

I hope there are no OH&S peeps in here :P we may fail to meet safety requirements

No OH&S at home

True story time

When dad and I were building a clubman we had it sitting on a table in the garage which was on wheels donated by woolworths or Coles and we could wheel it around the garage.

As the car was only sitting on wooden blocks on the table there was only 4 inches clearance between car and table but this night we needed to do something under the car so we wheel the table over to where the chain block is.

Now the chain block is attached to an RSJ that is in the roof of the garage and we used a seat belt between the hook and the car and winch up the rear of the car.

I grab a jack stand but dad says no need it's only a two minute job, he climbs under the car does the job and crawls out.

The very second he is clear of the car the seat belt breaks and the car comes crashing down onto the table.

We ALWAYS used jack stands after that so maybe OH&S should be applied with vigilance in a home garage

Yeah it's pretty old school here :P but that gives me something to work towards.... Cheers man!

Ant, not convinced on the red.... If the yellow/gold matched your car then it'd be good....

I won't go under a car without stands etc... Even doing my diff bushes before Texi, 10min job but put stands under, found the jack creeps so I was happy I thought about safety for a change!

I guess im looking at it as the wheels were meant to have these stickers onit, red really wont go with my car imo.. and the only other colour that rays makes the stickers in close to my car colour is gold.. they wont match the yellow exactly, they will be a little more subtly than bright yellow, and could break up the wheel nicely?.. they will match the brembo calipers in gold though too!

dunno what to do really ha..

a seat belt? lololololol

whats the SWL?? bahaha

At least 300kg

When I worked at a wreckers I would cut the seat belts out of the car and use them for slings to pull the motor and box out of the car

Never ever had one break before that night in the garage

I guess im looking at it as the wheels were meant to have these stickers onit, red really wont go with my car imo.. and the only other colour that rays makes the stickers in close to my car colour is gold.. they wont match the yellow exactly, they will be a little more subtly than bright yellow, and could break up the wheel nicely?.. they will match the brembo calipers in gold though too!

dunno what to do really ha..

i think go with the yellow Anthony, (not the fluro ones on the new SL's) they will look the part.

I'm buying a set of knock off TE37's soon and putting the red ones on (buying a set of real SL's after my move - too many bad stories about rims disappearing during transport for my likeing to do it now)

yea ive got the red already which it came with.... i think i may have to buy the gold ones and just see.. i played around with the photo shop some more and even if i dull the gold right down, it still looks good imo..

i kind of had the same trouble when picking number plate colours, i went for black and gold, the gold doesnt match but ties in really well imo, so it may work the same way, as the yellow wont be spot on the same, and im not sure if it would look too bright if it did anyways?...

yea not keen on the fluro, just sounds abit gay really haha

Yah, Fluro is Gaids!!!

But you've made all the right choices so far with the car so I'm looking forward to seeing what you choose ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...