Jump to content
SAU Community

Recommended Posts

Haha nah already did that with 250kw so it's all replaced :P

Haha

It's something I'll never have to worry about with the ultra progressive power delivery from the auto box, least I hope not anyway

Though I did do dome rough measurements and worked out if I move the trans cooler and air con thermo fan I can fit one of those Just Jap stealth front mounts in without cutting the bar, should be good for something, choockie reckons they are better even on stock boost

Haha

It's something I'll never have to worry about with the ultra progressive power delivery from the auto box, least I hope not anyway

Though I did do dome rough measurements and worked out if I move the trans cooler and air con thermo fan I can fit one of those Just Jap stealth front mounts in without cutting the bar, should be good for something, choockie reckons they are better even on stock boost

Your drivetrain will be fine ;)

I have to get a thin Davies Craig fan for A/c as mine was removed due to the huge plazmaman cooler, your Trans cooler can go on the drivers side and the fan can be replaced....

If your not gunna up the boost don't worry about the cooler, OR run E85 :P

It's already running 12psi

Plan is to go the front mount, injectors , Z32 AFM and a basic highflow or just get steel wheels so they last and that should do as far as mods for decent power

EDIT Wanna stay with 98 fuel as can get it anywhere

Edited by m.j.h

Hey guys, for those of you that dont know.... My clutch is now toast :P Didnt think it would last long at the power level considering it was way outside its happy zone!

Should have been double clutching not granny shifting :D

ANYWAY, that puts my car out of contention for the 26th as Jim Berry will be working his magic on my clutch around then.....

Ill still probably jump in with someone tho, CHOOKIE???? :woot:

Martin you still keen to drive my car to mats for cruise? if not mat make you way to mine :P otherwise i wont be able to come :'(

It's already running 12psi

Plan is to go the front mount, injectors , Z32 AFM and a basic highflow or just get steel wheels so they last and that should do as far as mods for decent power

EDIT Wanna stay with 98 fuel as can get it anywhere

Yeah I ran around 250kw on 13psi like that.... You may get away with a side mount

Martin you still keen to drive my car to mats for cruise? if not mat make you way to mine :P otherwise i wont be able to come :'(

Yeah I'll come get it if needed man, either way it'll work out fine!! :)

Awesome yay i wont not be able to go :)

cefiro is sold finally, 1250 but also got 3" front partt of the exhaust and highflow cat for the skyline, might try get those in before cruise if i have time :)

Awesome yay i wont not be able to go :)

cefiro is sold finally, 1250 but also got 3" front partt of the exhaust and highflow cat for the skyline, might try get those in before cruise if i have time :)

Your a goose :P

I'm back what's up guys.

Sorry said hello then bailed.

I didn't read any of the previous posts but skimming I think I saw the words women and naked. Newcastle chicks are the bees knees

We missed ya :P

We mentioned that the WT brings the Lulz....

Oh and plenty of broad minded personty types up here if that's your fancy lol

I don't know if it's the forum or the iPad but I have to laugh at the way it changes S L U T to broad minded person and T U R K E Y to the schpinter of the universe

It's the forum

Like the word kunt spelt with a c turns to

flamin mongrel

Or add an s to it and you get

dream boats

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...