Jump to content
SAU Community

Recommended Posts

So if you have a BOV and gate it they must cum on the spot then

I dunno as my BOV keeps commiting suicide :(

Oh, did you get the message i sent you??

how are you gunna get out of the driveway ant?? storage??

Yea going into storage hopefully next week, if not the one after that.. Very keen, been wanting to lower it since I bought it!

Then get it fixed pronto

Yeah got that message thanks

Will chase it up tomorrow and they better have a good solution. f**kers

It's on the big list to do

Yours isn't too high is it? I won't be dropping it crazy... Just lower it out of tractor spec as it is atm ha

Mines nearly stock height dude!

Ah well your getting your bcs, just drop them abit, or do you have driveway issues too?

No driveway to have issues with :P the GTT doesn't have the big kit so clearance issues don't really exist which is awesome!

I'll drop it a little but keep legal as its stock remember ;)

its annoying that on car sales there are NO GTTs in nsw with over 100,000kms.

f**kin hate dodgy dream boats...

just sayin.

I'm heading towards 150000 :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...