Jump to content
SAU Community

Recommended Posts

Oh btw, going to look at that clean white 33 in Newcastle sarvo :)

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Yea I'm keeping all stock parts....

The guy that can tune it is up in Brisbane I think from what JEM informed me

Ant, have you considered the HKS V-Cam System..

http://www.hks-power...vcam/index.html

Costs about $7,000 though (not including shipping from Japan)

thats only for the pro system - which that only made 30 off.

the step 1/2 versions are ~ 4000. You can also buy some of the parts seperate, which can make it cheaper, depending on the whats is trying to be acheived.

Most of the decent builders/tuners in australia have there own setup by modifing the neo intake gear to run on the rb26 head - alot cheaper :-) Mine will be possible getting this next year, depending on how responsive my final setup is.

Edited by wedge_r34gtr

Aww but sky wants to go on a boat ride!!

f**k you stance phags.

Haha oh benji please gtfo of thread.

Wish there was a ban from Newcastle section button.

Hahahaha.............. Nice! :P

Park it on top of an R33

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Nah dont think we should split the group mate, we will just stick together :)

Oh a nice call on the Haltech! You'll be very happy with it :yes:

Interesting about the ECU chip too!

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

Dont mention pies or Chookie will start drooling.

X26WK.jpg

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Because i have NFI i am going with NEW ONE :woot:

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Because i have NFI i am going with NEW ONE :woot:

hahah this guy, i like it.

i think i might call and ask about

http://www.npsonline.com.au/shop/item/4-star-car-alarm-01

this shit seems good, alarm, immob, turbo timer, price seems ok to. I just need to know about the dam key chip thing :domokun:

Oh oh oh J-RAD, Was down talking to Aaron @ Difftrans and he said your fkd :P Said the stock 34 diffs are a waste of space haha

At least i tried!

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Yeh i just got quoted around 1k for a full Viper alarm with turbo timer and immob, but its not a 4 point and the only insurance company that will touch me since im 23 is just car at this stage and they require a 4 point in the car and i now need to find a dam key with a transponder in it and whats even better is i dont have the code for the transponder i hope they can code it off the key i have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...