Jump to content
SAU Community

Recommended Posts

CP forged 86.5mm 1000HP manly rods and a tomei head gasket.

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

Its tuned on an incoming tide :laugh:

LMFAO FOR AN EXTRA 50 AT THE RUDDER KW

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

yeh oil system has been done, sump and cam baffles, oil restrictor, OEM GTR oil pump with upgraded pump gears to make sure they dont crack.

Im not 100% on the block i know they have had to bore it out to fit the pistons and then everything else that goes with doing that, ill have to speak to the guys at the shop to find out everything they did to it.

as far as the head goes i have NFI atm keep in mind im not a mechanic by anymeans and im just learning how all this stuff works now, i have been told the head had more damage then 1st thought and has had to have some more work done at the machine shop then they thought it would.

BTW found u a box

http://www.skylinesa...s-of-256-parts/

and i got some more info on the Varestone rims also

http://www.varrstoen.com.au/shop/2-2-1-wheels/2-2-1-rims-wheels-18i

they clear brembos with ease no issues, one of my m8s in SA said the local boys run them on there drift missles.

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Im so torn on what rims to get one day i want GT-C the next i want TE-37 the next i want some random set of work rims, FML

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

in the Volk GT-C gold center chrome dish, there is a few sets going around but they are all stagerd fitments

in the TE-37 White or bronze

in the random Works white or bronze again.

If only these where +12

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1296

Edited by T4NK

i think the rim you have currently on the car look pretty smick.

Yeh i dont mind them but they are a POS to clean, they have heaps of tight spots in them and i know 1 of the rear rims is buckled, i may look into the cost to have them fixed and get some center caps

BTW they appear to be GTR Nur spec Enkei NT03-M rims, i have never seen another set of them in my life, they have GTR NUR stamped around the center hub and are identical to these

http://www.enkei.com/nt03m.shtml

http://www.ebay.com/itm/LIMITED-EDITION-ENKEI-NT03-M-18x9-5-27-5X114-3-PURE-WHITE-EVO8-9-X-FD3S-SUPRA-/261068728160?pt=Motors_Car_Truck_Parts_Accessories&hash=item3cc8e8a760&vxp=mtrIm

considering a set of these in white, for 2k i can get a full set, with caps and lock nuts posted to me using DHL

http://www.perfectru...result_mode=qui

Edited by T4NK

oh em gee!! thats so kewl.

wonder how much aca will pay me for the vid if i say its a 40 zone?!

I will tell them i was doing 40 and you were dangerous driving at 10 and going to cause an accident :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...