Jump to content
SAU Community

Recommended Posts

hahahahahaha you always chime in at the best time Martin

if he's got black rims at 17/9 I might be keen ;)

He has custom sprayed gunmetal rims in MAN size, none of this faggy 17/9 crap lol

went for a drive on old Pac today. was pretty fun, only did the 60k zone as I thought that was the fun bit.. :( turned off just before the fun bit!!!!

very different drive style. it's like... skyline kicks out, take your foot off to straighten. evo kicks out, keep foot on and steer your way to safety? haha very strange. it also 4wd drifts and slightly oversteers which seems really easy to control.

fun fun.

did we make a date for Wooten?

went for a drive on old Pac today. was pretty fun, only did the 60k zone as I thought that was the fun bit.. :( turned off just before the fun bit!!!!

very different drive style. it's like... skyline kicks out, take your foot off to straighten. evo kicks out, keep foot on and steer your way to safety? haha very strange. it also 4wd drifts and slightly oversteers which seems really easy to control.

fun fun.

did we make a date for Wooten?

Why do i need a date ya kent? lol

No i dont think a date was set as yet... Make one!

Sorry i couldnt answer the questions yesterday man, was covered in concrete lol... So i just forwarded the messages etc!

hahaha how funny.

I can't just pick a date out of ny head! I have to ask the boss first.

all good man :) I found out some stuff :)

mainly timing belt isnt done! :( so I'm gunna do 100k service, diffs oil, transfer oil, gearbox oil, engine oil, and the brakes need doing so pads, fluid, gunna pull apart calipers and clean em, rotors need a SLIGHT machine cause there's a shudder in them.

f**k it, cause race car ay!

that should all last me a Couple years though I hope :)

hahaha how funny.

I can't just pick a date out of ny head! I have to ask the boss first.

all good man :) I found out some stuff :)

mainly timing belt isnt done! :( so I'm gunna do 100k service, diffs oil, transfer oil, gearbox oil, engine oil, and the brakes need doing so pads, fluid, gunna pull apart calipers and clean em, rotors need a SLIGHT machine cause there's a shudder in them.

f**k it, cause race car ay!

that should all last me a Couple years though I hope :)

Faaarrrrrrrk

And here I was thinking you got the bargin of the century but it needs all this wok done

And the bootlids needs to be fitted properly and all

it's still is a bargain, I'm just over cautious.

all those parts should only cost around 800 bucks. so once I sell all the skyline parts I'll only be 800 in the black. I came out even on the transition of cars. or around 500 bucks more haha.

lolololol oh man that boot fitment!

I have to do all that shit anyway if I want to race it, everyone should.

Hellllooooo nsw what's going on down in this backward time changing land of hipsters :ninja:

Jarrads come out of the closet an purchased a banana Evo

I'm still breaking cars and playing Bob the Builder

T4nk had a stack

Chookie needs more gate!

NSW is still full of cops and they are all still kents!

tank had a stack?

"I'm not coming out the closet so go away"

He put it on the 34 thread on FB which you cant be a part of because you are ghey!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...