Jump to content
SAU Community

Recommended Posts

Oh btw, going to look at that clean white 33 in Newcastle sarvo :)

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Yea I'm keeping all stock parts....

The guy that can tune it is up in Brisbane I think from what JEM informed me

Ant, have you considered the HKS V-Cam System..

http://www.hks-power...vcam/index.html

Costs about $7,000 though (not including shipping from Japan)

thats only for the pro system - which that only made 30 off.

the step 1/2 versions are ~ 4000. You can also buy some of the parts seperate, which can make it cheaper, depending on the whats is trying to be acheived.

Most of the decent builders/tuners in australia have there own setup by modifing the neo intake gear to run on the rb26 head - alot cheaper :-) Mine will be possible getting this next year, depending on how responsive my final setup is.

Edited by wedge_r34gtr

Aww but sky wants to go on a boat ride!!

f**k you stance phags.

Haha oh benji please gtfo of thread.

Wish there was a ban from Newcastle section button.

Hahahaha.............. Nice! :P

Park it on top of an R33

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Nah dont think we should split the group mate, we will just stick together :)

Oh a nice call on the Haltech! You'll be very happy with it :yes:

Interesting about the ECU chip too!

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

Dont mention pies or Chookie will start drooling.

X26WK.jpg

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Because i have NFI i am going with NEW ONE :woot:

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Because i have NFI i am going with NEW ONE :woot:

hahah this guy, i like it.

i think i might call and ask about

http://www.npsonline.com.au/shop/item/4-star-car-alarm-01

this shit seems good, alarm, immob, turbo timer, price seems ok to. I just need to know about the dam key chip thing :domokun:

Oh oh oh J-RAD, Was down talking to Aaron @ Difftrans and he said your fkd :P Said the stock 34 diffs are a waste of space haha

At least i tried!

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Yeh i just got quoted around 1k for a full Viper alarm with turbo timer and immob, but its not a 4 point and the only insurance company that will touch me since im 23 is just car at this stage and they require a 4 point in the car and i now need to find a dam key with a transponder in it and whats even better is i dont have the code for the transponder i hope they can code it off the key i have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
×
×
  • Create New...