Jump to content
SAU Community

Eoi 94'' R32 Gtr Gunmetal

On p's
 Share

Recommended Posts

vrkt33 Collaborator

vrkt33

Posted
Posted

So a deposit is taken at 3:38pm, you are then advised finance fell through a mere 2 hours later at 5:45pm. Only for this guy to happen to make his first post on sau in 4 years 5 minutes later singing the praises of this car?? Nothing sus, you could have at least waited a couple of days to make it seem semi legit. Not too sure how it can be such a good example when i see this thing out on prinny highway every friday night without fail bashing the thing off the limiter without any oil mods and an 18 year old motor.

On p's Rising Star

On p's

Posted
  • Author
Posted

Well here is a MSG from the buyer that fell threw mate the deposit was taken Sunday but I only put it up on sau today then the buyer called me couple hours after sayin his loan didn't go threw I can put up a pic of the recipt to mate, and I don't go to "prinny highway" all the time nor do i ever limiter bash. Stick any oil pressure gauge in my car if u like. Maybe keep ur opinion to yourself if your not interested in the car then don't say anything simple

sikcro96

Rank: RB20E

sikcro96

1 posts

Real Name:Benji

Sent 10 August 2012 - 11:43 AM

Hey mate,

I'm very interested in your gtr , do you get pulled over alot? And also what did you do about Insurance?

Really really keen on your car mate but that's really the only thing stopping me.

Kind regards,

Ben.

Reply

Report

sikcro96 Newbie

sikcro96

Posted
Posted

I signed up 4 years ago when I was 16 mate used to look in the galleries and shit, seen this car and went to have a look at it yesterday put a deposit down subject to finance and because i just started an apprenticeship I couldn't get it. But like I said its very clean mate, I dont no the guy. And so what if I haven't post shit I pm'ed him so dumbflamin mongrels like you don't get involved

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...