Jump to content
SAU Community

Help A Girl Out! R33 Steering Column With No Thread

kimmeh

By kimmeh,
in General Automotive Discussion

 Share

Recommended Posts

kimmeh Contributor

kimmeh

Posted
Posted

Hi my name's Kim,

:kiss: I need some help/advice.

Ok here's the situation.

So I bought an r33 off some guy, took the stock steering wheel off to put my new aftermarket hub and steering wheel on to find that there was pretty much no thread left on the steering column and was being held in place with electrical tape.

picture3mo.png

My 33 has an RB20E which is pretty rare

I got a steering column out of an R33 with an RB25DET from the wreckers but found out that it is about 1cm shorter than my threadless steering column, which means that it won't reach the uni-joint joined to the steering rack =(

So now I don't know what to do..

Cutting & welding anything on the steering column seems dodgy & dangerous, :unsure: & I don't like my chances of finding another Rb20e steering column.

Anyone have any REASONABLE ideas?

Hit me up - comment, msg

Any help would be appreciated.

:thanks:

  • 1 month later...
jhjones Rising Star

jhjones

Posted
Posted (edited)

This is the part number of the standard steering column for my car

4880515U01

Apparently if I can find a series 1 n.a. 33 it will fit. Any suggestions?

This is correct (just checked with Nissan Fast). R33 Series 1 2WD RB20E or RB25DE are the same.

Edited by H4x

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...