Jump to content
SAU Community

Recommended Posts

Hello, listing these parts for my house mate, the Suction Kit suits R32 GTR, injectors suit R32 GTR RB26 (RB30 too?), oil cooler kit should suit any RB ,SR too? (Does fit RB30/RB20/RB25/RB26).

GReddy Hard Pipe Suction Kit - in good condition, comes with everything in photo including pod filters $900

P1000798.jpg

P1000799.jpg

P1000800.jpg

2 x Z32 AFM with plugs - Used, in good condition, mesh unbroken $190 each

P1000794.jpg

P1000796.jpg

Denso 720cc injectors - Used, good condition, part number $380

P1000803.jpg

P1000804.jpg

P1000805.jpg

Tomei Z32 AFM Plug - Brand new in packaging $25 delivered

P1000793.jpg

P1000797.jpg

Oil Cooler Kit + Filter Relocation - Used, in good condition, everything has been thoroughly cleaned. Hoses are -10 size, cooler is 19row $190

P1000788.jpg

P1000790.jpg

Located in Canberra, happy to post anything, please contact me for a postage estimate. Call or text Andre 0403 645 640 or contact via PM. Thanks

you can get the greddy suction kit New from nengun for $1123 shipped and it comes with both the tomei plugs for the z32 afms.

you can get the greddy suction kit New from nengun for $1123 shipped and it comes with both the tomei plugs for the z32 afms.

This is $223 cheaper :) You can have the Tomei Plug too, if you like.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...