Jump to content
SAU Community

Recommended Posts

Hello, listing these parts for my house mate, the Suction Kit suits R32 GTR, injectors suit R32 GTR RB26 (RB30 too?), oil cooler kit should suit any RB ,SR too? (Does fit RB30/RB20/RB25/RB26).

GReddy Hard Pipe Suction Kit - in good condition, comes with everything in photo including pod filters $900

P1000798.jpg

P1000799.jpg

P1000800.jpg

2 x Z32 AFM with plugs - Used, in good condition, mesh unbroken $190 each

P1000794.jpg

P1000796.jpg

Denso 720cc injectors - Used, good condition, part number $380

P1000803.jpg

P1000804.jpg

P1000805.jpg

Tomei Z32 AFM Plug - Brand new in packaging $25 delivered

P1000793.jpg

P1000797.jpg

Oil Cooler Kit + Filter Relocation - Used, in good condition, everything has been thoroughly cleaned. Hoses are -10 size, cooler is 19row $190

P1000788.jpg

P1000790.jpg

Located in Canberra, happy to post anything, please contact me for a postage estimate. Call or text Andre 0403 645 640 or contact via PM. Thanks

you can get the greddy suction kit New from nengun for $1123 shipped and it comes with both the tomei plugs for the z32 afms.

you can get the greddy suction kit New from nengun for $1123 shipped and it comes with both the tomei plugs for the z32 afms.

This is $223 cheaper :) You can have the Tomei Plug too, if you like.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...