Jump to content
SAU Community

Recommended Posts

Mate you really, really need to learn how to internet. Seriosuly. Adjust the camber by purchasing adjustable camber arms. Besides those wheels look like what i would expect for a gtr running that offset.

I have 10.5 x 15 and that is dead in line with the guard, so if i look at your pick and subtracked 0.5" and 3mm then your car is what i would picture.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

You probably don't care, but be aware that spacers of any variety are defectable/illegal, and if you have an accident with them fitted you may have your insurance voided.

if you look at the shadow off the front wheel you see that it it 'kinks' about inline with the front bar, thats caused by the lip of the front bar being further out than the wheel, suggesting that the wheels are probably inside the line of the guards.

easy to spray mate ;) if your serious tho let me know...

Yer if i had my time again id go for more aggressive.... if i cant work out a way around it i will sell :/

ahhbee u could be right .. its hard to see via this pic. hopefully track him down and get some better pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...