Jump to content
SAU Community

Recommended Posts

Mate you really, really need to learn how to internet. Seriosuly. Adjust the camber by purchasing adjustable camber arms. Besides those wheels look like what i would expect for a gtr running that offset.

I have 10.5 x 15 and that is dead in line with the guard, so if i look at your pick and subtracked 0.5" and 3mm then your car is what i would picture.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

You probably don't care, but be aware that spacers of any variety are defectable/illegal, and if you have an accident with them fitted you may have your insurance voided.

if you look at the shadow off the front wheel you see that it it 'kinks' about inline with the front bar, thats caused by the lip of the front bar being further out than the wheel, suggesting that the wheels are probably inside the line of the guards.

easy to spray mate ;) if your serious tho let me know...

Yer if i had my time again id go for more aggressive.... if i cant work out a way around it i will sell :/

ahhbee u could be right .. its hard to see via this pic. hopefully track him down and get some better pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...