Jump to content
SAU Community

Recommended Posts

my friend and 1 have been going to the same mechanic for a while he seems to do great work but i think he is ripping us off now.

when i take my car to get a service im charged 1 1/2hrs labour when it takes him 45mins and within that time has about 3 smoke breaks.

i bought an oil cooler off him and installed it within 2 1/2hrs with no mechanical background.

my friend asked him how much for an oil cooler installed we both have gtts

he said parts and labour 5-6hrs at $110 n hr, not sure y it would take him that long just for an oil cooler.

my friend got a power fc installed asked him if that the best ecu you can get he said yes so he went ahead with it at a quoted price for 1550 then he called and said he cant do it at that price after he already quoted it but my friend said thats the price u quoted so he excepted it, when he was tuning it told my friend he needed a new fuel pump as it was broken but was working fine when he dropped it off and made the price 2000 and didnt give back the stock ecu.

my friend asked for a quote on a bigger turbo and he told him that he will need a nistune ecu because its better for the upgrade turbo then the power fc.

so the quote was $6000 for parts and labour was depending on how long it takes them.

i trusted the mechanic at the start now i think he just wants to rip us off because times are bad for him atm.

Link to comment
https://www.sau.com.au/forums/topic/403825-mechanical-work/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...