Jump to content
SAU Community

Recommended Posts

I have a set of R34 Headlights that i am looking to sell;

1 x Set Brand New R34 GTT Xenon headlights including Ballast Etc. $1800 for the Pair Complete

These are S2 R34 (2000 on) and have only got the one 4 pin plug (unlike the earlier ones which also had a 3 pin plug for the light beam leveller switch found on dash near steering wheel). These still fit Earlier models but can't use the leveller switch Obviously! (most switches were removed at compliance anyway).

I brought these incorrectly for a S1 a couple of years back for $3600,

Was going to include them in the sale of my Silver R34 Coupe, but buyer didn't want them to get the car cheaper. so i think $1800 is fair.

They are brand new in box with all wires & Ballast etc.

I will take pics of these later today, They are new what more can be said. The ultimate upgrade to make your 34 look mint!

Will sell without Ballasts & Globe for $1500.

Priced to sell, Really not interested in going lower at this stage. I understand that R34 popularity is dropping off, hence the realistic price. This is the price of one headlight new from Nissan. So grab a bargain.

Pm for more info or mobile number.

Well i will take some pics very shortly and you can decide. I have honestly never sat a set beside each other before to compare. I just don't want to mis-represent them in any way.

Cheers

post-12420-0-65887200-1341294712_thumb.jpgpost-12420-0-79120600-1341294741_thumb.jpgpost-12420-0-30903800-1341294767_thumb.jpgpost-12420-0-56870300-1341294796_thumb.jpgpost-12420-0-98274200-1341294823_thumb.jpgpost-12420-0-92590500-1341294842_thumb.jpg

Ok i am not a dang-fangled photographer and my partner only has a DSLR. So i will get her to take some decent ones tonight. As for difference you can see in the picture of the rear of the light, there is only the single 4 pin sq. plug. There is no 3 pin plug in the light housing body. As far as i can tell that is the only difference; as stated above that is for the light beam angle/level adjustment.

Seeing as these will fit GTR these are a VERY CHEAP upgrade for your $50K+ Vehicle to make it look pristine.

Cheers Webber

Had a few private offers guys, at this stage $1800 is what i am comfortable with.

Going from the interest these won't be for sale very long.

:D

Ideal way to spend your Tax return!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...