Jump to content
SAU Community

Recommended Posts

I have a set of R34 Headlights that i am looking to sell;

1 x Set Brand New R34 GTT Xenon headlights including Ballast Etc. $1800 for the Pair Complete

These are S2 R34 (2000 on) and have only got the one 4 pin plug (unlike the earlier ones which also had a 3 pin plug for the light beam leveller switch found on dash near steering wheel). These still fit Earlier models but can't use the leveller switch Obviously! (most switches were removed at compliance anyway).

I brought these incorrectly for a S1 a couple of years back for $3600,

Was going to include them in the sale of my Silver R34 Coupe, but buyer didn't want them to get the car cheaper. so i think $1800 is fair.

They are brand new in box with all wires & Ballast etc.

I will take pics of these later today, They are new what more can be said. The ultimate upgrade to make your 34 look mint!

Will sell without Ballasts & Globe for $1500.

Priced to sell, Really not interested in going lower at this stage. I understand that R34 popularity is dropping off, hence the realistic price. This is the price of one headlight new from Nissan. So grab a bargain.

Pm for more info or mobile number.

Well i will take some pics very shortly and you can decide. I have honestly never sat a set beside each other before to compare. I just don't want to mis-represent them in any way.

Cheers

post-12420-0-65887200-1341294712_thumb.jpgpost-12420-0-79120600-1341294741_thumb.jpgpost-12420-0-30903800-1341294767_thumb.jpgpost-12420-0-56870300-1341294796_thumb.jpgpost-12420-0-98274200-1341294823_thumb.jpgpost-12420-0-92590500-1341294842_thumb.jpg

Ok i am not a dang-fangled photographer and my partner only has a DSLR. So i will get her to take some decent ones tonight. As for difference you can see in the picture of the rear of the light, there is only the single 4 pin sq. plug. There is no 3 pin plug in the light housing body. As far as i can tell that is the only difference; as stated above that is for the light beam angle/level adjustment.

Seeing as these will fit GTR these are a VERY CHEAP upgrade for your $50K+ Vehicle to make it look pristine.

Cheers Webber

Had a few private offers guys, at this stage $1800 is what i am comfortable with.

Going from the interest these won't be for sale very long.

:D

Ideal way to spend your Tax return!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...