Jump to content
SAU Community

Recommended Posts

Located in VIC - melb western suburbs.

0424999936

Greddy forward facing plenum with Greddy throttle body adaptor. Also comes with longer throttle cable, all bolts and injector seals, s2 rb25 throttle body. Everything needed to convert to forward facing plenum. $900

p7080116.th.jpg

p7080115.th.jpg

p7080117.th.jpg

p7080118s.th.jpg

Hybrid FMIC - comes with mounting bracket that replaces front reo, neat setup. $250

p7080121.th.jpg

p7070100.th.jpg

Nismo 555cc injectors - only done about 1000km. $500

p7080113.th.jpg

Turbosmart Plum back boost controller, with aluminium piping and turbo hose to suit. $150

p7070107.th.jpg

pm's replies to.

they are side feed injectors so im not sure if they fit neo. you can have the rail they came in with adjustable pressure reg speedflow fittings and braided hose for 600 with the injectors

its off a series 2. should fit both though I would think. piping is to suit forward facing plenum not return flow, but youre welcome to it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...