Jump to content
SAU Community

Recommended Posts

Hi Guys,

Thinking of repainting my Black V35. Thinking of sticking on to the black but would like some suggestions of better colour options(with photos if you have). Also what are the questions that i should be asking like what type of paint should i use and other info. Could someone give me rough price for the job.

Thanks a lot guys.

Link to comment
https://www.sau.com.au/forums/topic/404273-v35-repaint-tips-and-suggestions/
Share on other sites

  • 1 month later...

hey guys, few questions....cheap and best place to buy the paint in Brisbane...or do you think i shud order online....secondly is clear coat optional and do i need to buy some premium thinner for the paint...

buy the paint online? you are not going to try and paint it your self right? and clear coat, of course !!!!

$2500 or more for a respray from someone cheap..

$2500?! Would have thought that $4k would be a more appropriate number - for a decent job with proper clear applied that is.

Agreed, I had the turret (hood), and boot lid resprayed in another car a few years back now, and that was $900 - wasn't triple layer pearl paint either.. You can probably add 50% more if you want a pearl coat.

$2K would probably only get u a taxi paint job. i.e.: door jams, engine bay etc untouched. A proper paint full respray would cost you $5K++++++

so true i.e Sheldon's ._.

i would recommend just go BLACK so just in case unseen accidents color matching will be a breeze

i got a mate that goes car wrap pm me i can give more info on facebook

so true i.e Sheldon's ._.

f**k off, my paint job is awesome - 3 layer pearl for 2k (Usually he does it for 4k - 5k). Not painting inside the doors / engine pay isn't the biggest deal, my cars white, inside my doors are an off white - in no way is my paint job a "Taxi paint job"

Even if I had 5k to spend i'd still rather spend 2k to get what i've done. I would change nothing about my car.

Edited by sheldon2369

so true i.e Sheldon's ._.

i would recommend just go BLACK so just in case unseen accidents color matching will be a breeze

i got a mate that goes car wrap pm me i can give more info on facebook

.

Black is one of the worst colours to go with, although it does look amazing on most cars. Attracts heat and if you live in 25-30 degree heat every day you don't will suffer.

Scratches come up horribly and is very difficult to maintain, but if you take care of it and don't mind the extra heat then it can turn out being a very good investment.

f**k off, my paint job is awesome - 3 layer pearl for 2k (Usually he does it for 4k - 5k). Not painting inside the doors / engine pay isn't the biggest deal, my cars white, inside my doors are an off white - in no way is my paint job a "Taxi paint job"

Even if I had 5k to spend i'd still rather spend 2k to get what i've done. I would change nothing about my car.

You haven't changed colour mate. Pearl white on white is a pretty breezy job - compared to changing the colour all together.

Ever seen those cabs that are orange outside and inside is all blue still.. lol!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...