Jump to content
SAU Community

Recommended Posts

G'day

Hi mates, i've got a Apex'i SAFC (Bule screen one) , just wonder what is the good setting for R34 GTT?

My aim is just a little performace, because it's for daily work use. (Fuel)

This is my setting now:

*Hi-Thrti * *Low-Thrti

1000rmp+2% 1000rmp-2%

2000rmp+2% - 10%

3000rpm+2% -0%

4000rpm+3% +2%

5000rpm+4% +3%

6000rmp+5% +4%

7000rpm+2% +1%

8000rpm+2% +1%

*Throttle

LO HI

25% 50%

*Dec.air

Thr....%

Nei: 1.0%

Ne2: 1.5%

Cheers

steven

Link to comment
https://www.sau.com.au/forums/topic/40432-your-opinion-on-apexi-safc-please/
Share on other sites

You will need to tune it on a dyno and richen/lean based on your A/F ratio. You cannot just add it in with "feeling". If you get it wrong, you will definitely destroy your engine. Every car is different, exhaust, air filter, boost level, all can cause differences and therefore your setting may not be able to be used for on other cars, also you can't just plug in the numbers that your mate has on his SAFC just because the other person has an R34 GTT too.

Decceleration Air is only needed if you have an atmo-venting BOV (aftermarket).

Mine still on 0%, untuned...... trying to book a time on dyno sometime next weekend and should have a result by then. It's a R33 GTS-t though, not R34 GT-T so I dunno how are you gonna compare it.

Cost varies from place to place, but a group dyno day (run only no tuning) will cost around $50-100, and tuning maybe somewhere $100-150 onwards depends on how much needs to be done. But I don't own a workshop so ring around for prices. I could be wrong.

I have an r33 GTST with an safc, your looking around $110 an hour on the dyno + wateva you organise with the workshop for tuning, usually on the dyno for around 1 or 2 hours give or take depending on the car. Get i professionally tuned dont stuff around with it yourself, if the car runs lean you'll get detonation and you dont want that!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...