Jump to content
SAU Community

Recommended Posts

Hi all,

I am in a position to purchase a stock standard (Exhaust and Wheels ok) Skyline. Here are my must have's:

  • Must be stock, with the exception of exhaust and mag wheels although I would prefer standard exhaust.
  • Must have less than 100k on the odometer and be able to prove it.
  • Must be manual.
  • Everything else must be stock standard and must have RWC. Whilst I would prefer one with rego I can fix that up.

I don't care too much what colour it is although I am not fond of the grey ones. I would prefer a car with no extra gauges in the cockpit, the standard ones should be fine. An after market cluster is fine but you must be able to prove the K's on it and before it was fitted.

I a have the cash ready to go but am happy to wait for the right car. I will want to test drive first and do all the normal checks (REV's and Car History).

Please PM me with details and photo's. Please include photo's of the interior and engine bay.

I am happy for a discussion in this thread on any prospects.

Cheers,

Richard.

Link to comment
https://www.sau.com.au/forums/topic/404389-wtb-qld-1997-r33-gts-t-standard/
Share on other sites

Haha glad you can play along.

Anyways 100,000km on a R33 is very very unlikely

Even if you do find one the chances of someone being able to prove to you its correct are slim.

Just do the usual checks and take it to a place to do a compression check.

All the cyl show around 155-160 then its fine.

Or you could buy a 34 for a good price.

Why do you want a 1997?

Haha glad you can play along.

Anyways 100,000km on a R33 is very very unlikely

Even if you do find one the chances of someone being able to prove to you its correct are slim.

Just do the usual checks and take it to a place to do a compression check.

All the cyl show around 155-160 then its fine.

Or you could buy a 34 for a good price.

Why do you want a 1997?

I am after a 33 or a 34, just figured a 34 would be out of my price range of around 8 - 12k, preferably closer to the 8k. Also in the GTS-T and GT-T models I prefer the body shape than the 34's. Having said that I would give up my clubby for a r34 GTR. :woot:

Logbooks with < 100 000kms is going to slim to none!

Compression test is much more important than kms on a car i think.

I bought a stock 97 grey skyline only 2 months ago and i payed a premium! (No way its going to cost 8K)

EDIT - http://www.skylinesaustralia.com/forums/topic/404239-1996-r33-gts-t-s2-for-sale-sydney/

As close as you will get!

Edited by CLNSKY

Logbooks with < 100 000kms is going to slim to none!

Compression test is much more important than kms on a car i think.

I bought a stock 97 grey skyline only 2 months ago and i payed a premium! (No way its going to cost 8K)

There is more to a car than just the motor. Drive train gets affected by the number of k's a car does as well. Gear box wear, diff, bearings etc.

I have seen 97 models for sale at the 8k mark with about 100k on them, some a fraction over (which would be ok) and some a fraction under. I can go higher as well. Like everyone I want the world and don't want to pay anything for it. Not saying I won't. :rolleyes:

EDIT - http://www.skylinesa...or-sale-sydney/

As close as you will get!

Yup, have seen that.

Again with the silver/grey.. Yuk. (Sorry pat). Just not my thing.

My preferential colour is Burgundy.

I have seen a few on carsales with under 100k on the OD at about 9.5 to 10k. I would assume I can get a little off that as well. Like I said in my OP, I am happy to wait for the right car.

Also I like the interior on the 97 r33 as well, the seats look neater than the velvet/velour in the older ones. Just sayin.

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...