Jump to content
SAU Community

R34 Gtr Apexi Power Fc With Hand Controller For Sale.

NissanForLife
 Share

Recommended Posts

NissanForLife Collaborator

NissanForLife

Posted
Posted

I have my Power FC for sale out of my R34 GTR with the hand controller. It has less than 10,000kms on it. I have gone with a Haltech Platinum pro to support my new E85 route, so I no longer need this ECU. This ECU is the L-Jetro normal version Power FC with the need to still run AFM's.

It has a tune of 380kwatw installed on it, which was tuned by Racepace. It could be easily installed at home by anyone to get it to the tuner, but I would not accelerate anywhere what so ever until it is on the dyno.

$700

Call Simon on 0408 766 268.

post-65691-0-88980300-1342151182_thumb.png

post-65691-0-16179700-1342151214_thumb.png

post-65691-0-32300600-1342151241_thumb.png

post-65691-0-93029600-1342151267_thumb.png

NissanForLife Collaborator

NissanForLife

Posted
  • Author
Posted

I've just done a bit research on this and seems you can do it with a few tweaks with the AFM's and O2 sensor with bridging the wires in the 26 loom or something, but yes it has been done many times before. The RB26 Power FC though does not support the Variable cam timing (VCT) of the RB25, but this is not a huge concern for power levels and really derive you of HP.

VCT is only a means of having an engine fuel efficient whilst driving it casually, whilst being able to get power out of it in the mid to top end. If you tune it without it, you will still be able to achieve the same HP level.

I am assuming you have the original RB25 ECU though, because you will need it for the Power FC to plug into.

These 2 SAU mebers have some very good knowledge on this subject, so feel free to ask them how to do it if you end up doing this mate.

paulr33

The Mafia

If you are an ECU Noob, dont worry too much, there are many good people around who can help you with this.

Where abouts do you live Bill?

Cheers, Simon.

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
    • Adam_ECR33
      Hello sau 👋

      By Adam_ECR33 · Posted

      Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      When you say your cams are 272/262 is that 272in and 262ex?
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...