Jump to content
SAU Community

Recommended Posts

Hello everyone

for sale is my RB25 NEO engine.

I had that installed in my R33 Series II .

I have now installed a R33 engine in it with new loom and new ecu.

The engine block comes with Injectors (aftermarket) I am not sure what brand are they , haven't had chance to look at that.

Intake plenum

Blow off valve

Manual boost controller

Wiring loom ( Piggy back removed)

Standard ECU

It doesn't have the Turbo as shown as its put back into my car and no coilpacks

No compression test has been done .

Make me an offer and its all yours.

Also for Sale Separate : Splitfire Coilpacks DIS008 (r34 GTT)

Used for about 7 months , doesn't fit the nw engine so its for grab.

$390 for that includes shipping.(picture attached)

Location : Victoria, Seaford

Price: I am looking for 1500+ depending on what is required

Send me an email : [email protected]

post-75024-0-06407300-1342565118_thumb.jpg

post-75024-0-93409100-1342565121_thumb.jpg

post-75024-0-82400200-1342565126_thumb.jpg

post-75024-0-77474700-1342565794_thumb.jpg

Edited by Burrieddreamz
Link to comment
https://www.sau.com.au/forums/topic/404973-rb25det-neo-r34-gtt-engine-for-sale/
Share on other sites

Its still sitting at my mechanic's garage . I'll have to take them out in order to find out how big are they and what brand they are.

I'll go on the weekend to pick up my car and the parts that were removed

  • 1 month later...

thats exactly what i was thinking , i just bought an neo for my r33 and there heaps better than the r33 rb25s

why would you take out a neo engine and replace with a older engine???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...