Jump to content
SAU Community

Rb25/30, Kando T67 & Mvr, Powerfc, 750Cc, Splitfires ++++

32TAXI
 Share

Recommended Posts

32TAXI Experienced

32TAXI

Posted
Posted (edited)

Will only seperate parts once engine is sold!

RB25/30 Long motor rebuilt november 2011,

Reco head with welded vtc and waterjacket, RB20 inlet cam, 25 exhaust cam, metal head gasket.

Linished std crank, crank collar, N1 oil pump, New acl bearings and moly rings on std RB30E pistons & rods.

1.2mm restrictors, block drilled, lightly honed. New Exedy HHHD clutch, timing belt, idlers and waterpump.

Can see running and fitted to vehicle.

$1650

Kando T67-25G with Tial MVR 44mm wastegate mounted off exhaust housing.

Includes modified stainless top mount manifold, dump and screamer/flanges/flex.

Turbo 4months old & still under warranty.

Fitted to vehicle and only for sale once engine sold!

$1250

Freddy RB25 inlet manifold & 80mm throttle body, modified to clear R32/S13 master cylinder.

Chrome outer and machined face, Tps & 3' intake pipe/hoses included

Fitted to vehicle and only for sale once engine sold!

$450

Apexi powerFC suit rb25

Includes hand controller, Z32 afm & k/n pod filter.

Tuned by Pits - Rb25 with Z32 afm with 80mm throttle,750cc & Gt3037s with .63.

Fitted to vehicle and only for sale once engine sold!

$1000

Nismo 750cc injectors in modified fuel rail with twin feeds.

Fitted to vehicle and only for sale once engine sold!

$600

Splitfire coilpacks suit series1 R33 Rb25.

Fitted to vehicle and only for sale once engine sold!

$350

Greddy GREX oil cooler kit

big cooler, thermostat and filter relocator, New Russell braided hose

Fitted to vehicle and only for sale once engine sold!

$550

R32 40mm Alloy Radiator & 16' electric fan

Fitted to vehicle and only for sale once engine sold!

$220

Complete 3.0 litre setup ready for your transmission in a silvia, skyline or whatever????

All parts are currently fitted to my R32 GTST and I drive it everyday to work.

No dyno sheets, No tyre kickers & No bullshit!

Very aggresive and No knock even on 14psi

Heaps of quality R32 parts available!

Will only seperate parts once engine is sold!

Will sell all $5500 ono and include spare RB25 long motor!

Gold coast

Sam 0423 648 114

Edited by 32TAXI
Josh_TypeX Proficient

Josh_TypeX

Posted
Posted

This is a bargain... Makes me depressed thinking I how much I have spent putting together a similar setup (without a 3L). Am I reading right that you are including 2 running engines in the $5500 package?

32TAXI Experienced

32TAXI

Posted
  • Author
Posted

Yeap, All the shit plus 2x engines - 1x rb25/30 complete running, 1xrb25 spare long motor

My plans were to bolt 25 back in and go further with 30!

Basic bolt up to your gearbox in either R32 or R33 and GO!

post-58828-0-39228000-1343038569_thumb.jpg

p.s. Turbo in picture not included in sale

32TAXI Experienced

32TAXI

Posted
  • Author
Posted (edited)

Story of the 25/30!

The old rb25 had leaky valve stem seals and smoked on hard decel, but still had even comp on all.

So weighted it up to rebuilt a 25 or 30 but scored a 30 Short block, collar, cometic head gasket, new waterpump and 2x 1.2mm restrictors cheap off SAU so it started.

.

Bought a spare 25 head, welded water passage and vct then got full reco and 2x valves by Gilberts.

Got a New genuine N1 oil pump and Nissan gasket set, Acl bearings and Moly rings from states at the right time.

Crank was sent to Probuilt, Grubscrews and collar fitted, checked and linished.

Gave the block a good clean, drilled, restricted and a light hone(slight top ring wear) Standard bores, deck and crank, new dayco belt and hi/lo tensioners, RB20DET inlet cam/sprocket as always wanted GTR covers!

I'm a Mechanic of 15 years at Nissan, In the trade as they say and was built cheap so sell cheap.

RB25/30 was built in november 2011, No forgies, No rods, supported well, never spun over 7k or 14 psi.

Just a tough street engine that pulls hard, very aggresive and runs great.

Needs a good balancer as never got around to it & VCT can be fitted via external line or internal mod if needed.

$1650

Parting out my modified R32 4 door sedan once engine sold

eg. 327AXI rego, 5 months rego, mod plated, no defect, rolling shell $3500, Safety21 4door 4seat 6point rollcage $1200, GTR front bar $500, GTR Bonnet $250, R33 5 speed g/box $1200, nismo 2way lsd $650, Tein HE driftmaster coilovers $900, cusco rear arms $250, RG tension arms $150, Adjust front upper $220, 28mm rear swaybar $ 250, Sabelt GT1 seats $650, Greddy profec b spec 2, greddy timer, pivot shiftlight, Nardi wheel + + + +

Edited by 32TAXI
32TAXI Experienced

32TAXI

Posted
  • Author
Posted

Keen on the inlet mani and oil cooler, let me know wen ur ready to sell.

Motor and inlet sold

Oil cooler available $550

Turbo, power fc, injectors, splitfires and alloy radiator also available

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • aznriptide859
      How To: "Refabricate" a Stagea 260RS/R33 GTR Speedo Sensor

      By aznriptide859 · Posted

      Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Rezz
      WGNC34 - floor mats

      By Rezz · Posted

      Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...