Jump to content
SAU Community

Wtb: 19" Wheels Mags Rims With Staggered Offset And Width

Play
 Share

Recommended Posts

  • 3 weeks later...
Play Explorer

Play

Posted
  • Author
Posted (edited)

I have a set of forged Enkei RPF1's 19x8.5 +22 19x9.5 +22. In great condition with no gutter rash. pm if interested.

Thanks. I'm not sure +22 is gonna be any good for me as i went through TE37 19x9.5 +22 and the fronts stuck out about half an inch and the rears stuck out about an inch. Then recently trial fit 3 different size Buddy Clubs 19x9.5 with +35 - hits the calipers, 19x9 +35 - hits the calipers, 19x8.5 +22 clears but sticks out about 1/3 of an inch.....

Going bonkers looking for a set of wheels

Edited by Play
Play Explorer

Play

Posted
  • Author
Posted

selling my 19" LMGT4s currently on my sedan. 8.5 +25, 9.5 +30. Click on sig below for pics. Will be available in Oct when my new wheels arrive from Japan.

These might be a goer. Bummer your in QLD though. How much are you looking at letting them go for?

n15m0 Grand Master

n15m0

Posted
Posted

These might be a goer. Bummer your in QLD though. How much are you looking at letting them go for?

2.5K wheels only. You will need to be lowered at least 1" or more though to fit these. Mine are lowered currently on Z suspension all round, the fronts sit flush, the rears have a very discreet poke approx 5-10mm on 245 rubber.

Play Explorer

Play

Posted
  • Author
Posted

Lowering isnt a problem as i am running HKS Hypermax III.

I already have the tires (245/35/19 and 275/30/19).... but i see that you advise that even 245 rubber on the rear pokes out 5-10mm. Thats gonna be a problem.

Play Explorer

Play

Posted
  • Author
Posted

These are the exact same wheels with identical width and offset but with an added 10mm spacer at the rears bringing it to 9.5 +20 and slammed...

DSC_8991copy2.jpg

Thanks for the illustrations. You say they wont be available until October?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...