Jump to content
SAU Community

R32 4Door Part Out, 2Way, Cage, Tein He, Cusco, Apexi, Greddy


Recommended Posts

No lowballs please

R32 4 door rolling shell, pearl white, Mod plates for rollcage, rb25 motor and manual box.

Nardi s/wheel, most of interior, bosch 040 f/pump, HEL braided brake lines, RB25DET loom, hicas lock bar.

Stock brakes, suspension and arms, 16x7' stagea wheels, Big battery in boot and new stereo.

Currently has 6 months rego with 327AXI plates,

No motor, box, diff or shafts, No bonnet or front bar, No front seats or rear sway bar.

$3500

Safety21 R32 4door 5seat rollcage, 6 point bolt in with padding.

Rare as and minimal intrusion, Hugs window line and even had baby seat in back!

$1000

Tein HE Driftmaster coilovers

8k-6k Two way height adjustable

Damper adjustment

$800

Nismo 2 way LSD, R200 non abs housing with 4.3 gears, 5 bolt shafts included

Always spins 2 wheels!

$700

Big Brake Kit suit R32 or silvia

DBA 4000 slotted GTR brembo 328mm rotors

Unique autosports caliper adaptors/dogbones

All near new

$750

Cusco rear upper control arms

Adjust your camber bro!

$250

Cusco R32 GTR 30mm rear sway

Includes Solid links

$250

R32 GTST front upper control arms

Solid & Adjustable, Bearings replaced.

Adjust your camber bro!

$250

RG front tension rods

Castor adjustment and solid

$150

R32 GTR plastic front bar, lip and grill

Few marks on bar, lip ok and all black.

$500

R32 GTR alloy bonnet

Been modified to fit 30

Cheap and White

$300

R32 4door Mspec side skirts

Few marks and Plastic

$200

Sabelt GT1 fixed back seat x2

Black in very good condition, FIA approved

$650

2x bottom mount seat brackets suit R32-33

$250

Apexi Power FC suit R33 RB25DET

Hand controller, Z32 air flow meter and K&N air filter included

PITS tune for GT30r, 750cc, Z32, plenum & 80mm throttle.

$1000

Splitfire coilpacks suit R33 series 1 & GTR

$350

Nismo 750cc injectors

Standard fuel rail modified with extra fuel feed.

$650

T67-25G 10cm kando, Tial MVR 44mm, manifold, dump and screamer

Turbo only few months old, still under warranty

Wastegate mounted off exhaust housing and includes flanges and flex for plumback

Stainless hi mount manifold, mild dump and screamer

$1250

Greddy GREX oil cooler kit

Includes filter relocator, big cooler and thermostat.

New lines fitted 6 mths ago

$550

R32 40mm Alloy Radiator & 16' electric fan

$220

R32 4 door 3' exhausts

Race - full 3' twin 3' tips, no mufflers

Street - Full 3', big rear stainless muffler

Twin 2.5-3' rail slider front pipe & std cat

$450

Twin bosch 044 fuel pumps, big surge tank and 8mm fittings

$450

More to come!

Sam 0423 648 114

Gold Coast

Edited by 32TAXI

post-58828-0-65533500-1343810384_thumb.jpg

post-58828-0-83938200-1343810504_thumb.jpg

Spares:

R32 4 dr Bootlid, no holes or dents, white $80

R32 4 dr series 2 tailights $150

R32 projector headlights $150

R32 centre console and lid still attached $50

R34 GTT 4x 17x7.5 Wheels, 2x good 235 tyres $200

Open to offers

Edited by 32TAXI

Sell me ur rear window? Lol

Just build a another one lol - shell, cage, coilovers = $5k + your motor, box,diff, seats, bonnet and bar!

splitfires, gtr bar n 4dr skirts SOLD

Edited by 32TAXI

Leyt me know if sale falls through on headlights mate, super keen, wouldn't be willing to sell indicators as well? Cant find a decent set anywhere!

Would you freight the tail lights to WA?

Yes, Freight no probs, best PM me for details

All still available:

PowerFC and Z32 afm $1000

T67-25g+Tial MVR+rb25 mani,dump and screamer $1250

Tein HE driftmaster coilovers R32gtst $800

Nismo 2way R200 non abs 4.3 gears 5 bolt shafts $700

Front upper adjustable control arm R32gtst $250

Cusco Rear upper adjustable control arm R32-S13 $250

Cusco Rear sway bar+solidlinks 28mm R32GTR $250

DBA4000 328mm rotors & UAS adaptors R32-S13 $800

bump for a a seriously straight body 4dr!, btw very happy with the bar and skirts, cheers mate :)

Thanks Guys, Very uphappy to see it go!

R32 4door complete car less drivetrain, front seats and front bar $3000ono (modplated LH8,LO1,LA1,LK6)

Add a 6 point rollcage $1000

And "coaster's" RB25DET manual conversion $1650 = legal fun!

Edited by 32TAXI
  • 2 weeks later...

Shell, Cage, Turbo, seats & radiator Sold

Whats left:

Cusco rear arms $250

Cusco rear sway bar $250

R32 twin front pipe $150

R32 3' straight catback $200

Big Brake rotor kit $700ono



  • Latest Posts

    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
    • Well, I was using ECUTalk software if that helps? Not sure if that only can see engine codes? Is there any other software I could give a try? Or any way I can get a blink code?
    • I never touched it, it should have. I'll try to give it an adjust. With IACV plugged in, it idles at around 1120RPM on average. Max 1200 RPM, Minimum 1025RPM before it starts dropping right before stalling. Took the data from the Nistune logs.
    • Thats what im trying to solve bro  no one with aem tuner experience would advice  much appreciate 
×
×
  • Create New...