Jump to content
SAU Community

Gtr Apexi Pod/rsm/essential Catch Can/trust Boost Oil Gauges/r32 Trust Pillar Mount/gtst Afm/3 Bar Map Sensor/8Psi Actuators


Recommended Posts

Hey guys some parts up for sale all located in Melbourne south east. More pics on request.

GTR APEXi power intake pod filters including adapters and brackets in very good condition $120

post-17409-0-76727200-1343869512_thumb.jpg

R32 GTR Essential Catch Can fits behind the battery $150

post-17409-0-65037700-1343869551_thumb.jpg

post-17409-0-34234900-1343869591_thumb.jpg

Green Label Gtst AFM with plug working fine with both meshs intact $60

post-17409-0-79944200-1343869651_thumb.jpg

Greddy dual pillar pods including boost and oil temp gauge with sensor $200

some minor cracks on the apillar

post-17409-0-22488300-1343869675_thumb.jpg

post-17409-0-55135400-1343869706_thumb.jpg

Apexi Rsm + Gsensor (has some minor scratches) $170

post-17409-0-94644400-1343869762_thumb.jpg

3 bar map sensor uses exact same calibration as the GM sensor brand new still in packaging $50

Suitable for any one planning to run high boost on Link, Haltech etc...

post-17409-0-14489500-1343869782_thumb.jpg

GTR 8psi Actuators with adjustable rods $70

Great for dialing in some preload and getting turbos to come on boost faster

post-17409-0-21512300-1343870298_thumb.jpg

hi, brendan here. brand new to the forum - id like to buy the AFM (green sticker)

can i get a contact number please.

hi mate how mich you want for the gauge holder, no gauges... send me a msg please im not on here much, thanks 0403423121 dean

Adz2332

They are for rb26/nismo afm. The z32s won't fit, my mate had the same ones as this and cut the flange off and welded a z32 one on. Not really sure if it's worth the effort though.

  • 3 weeks later...

GTR APEXi power intake pod filters $120

Green Label Gtst AFM with plug working fine with both meshs intact $60

R32 GTR Essential Catch Can fits behind the battery $150

Greddy dual pillar pods including boost and oil temp gauge with sensor $200

Apexi Rsm + Gsensor (has some minor scratches) $170

3 bar map sensor uses exact same calibration as the GM sensor brand new still in packaging $50

GTR 8psi Actuators with adjustable rods $70

Make offers, worse i can say is no ;)

  • 2 weeks later...
  • 2 weeks later...

GTR APEXi power intake pod filters $120

Green Label Gtst AFM with plug working fine with both meshs intact $60

R32 GTR Essential Catch Can fits behind the battery $150

Greddy dual pillar pods including boost and oil temp gauge with sensor $200

Apexi Rsm + Gsensor (has some minor scratches) $170

3 bar map sensor uses exact same calibration as the GM sensor brand new still in packaging $50

GTR 8psi Actuators with adjustable rods $70

Not much left, msg if your interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
    • Have a chat with the tuner, you'd want to drive the car straight there.
×
×
  • Create New...