Jump to content
SAU Community

Recommended Posts

Currently the only place to get United E85 from the pump is at a service station in Warrick. It is proven to be a superior option to the Elflex sold by Caltex. This page has been set up to show how keen us Queenslanders are to have access to it all over the state. Please like/share and support the page below so we can show United Petroleum how many of us want their e85 readily available.

https://www.facebook.com/BringUnitedE85ToQld

Link to comment
https://www.sau.com.au/forums/topic/406443-help-bring-united-e85-to-qld/
Share on other sites

Although I know it probably wont help, I'll like it and share it.

This is the biggest single thing that proves the government's carbon tax is just to make them money rather then save the environment. They are taxing the hell out of everyone, yet theres a cleaner fuel out there and there not rolling it out. This is also strange seen as Holden were heavily marketing the new commodores as being designed to be compatible with e85.

I know there are holes in my argument like not all cars being able to run on E85 but ffs this government annoys me, and the worst part is everyone agrees until its to late and we have some stupid ass Tax on nearly everything

end rant

I think you'll find that the government is rolling out Ethanol in fuels, in that its mandated a targeted a minimum amount to be sold (8% or 12% or something like that I think). Doing more faster would be impractical because almost noone is able to use the stuff. And of course since its a free market they can't force servo's to roll e85 out.

And even then, the biggest issue that there is currently is that there simply isn't enough production capacity in the country to make it. All the existing plants are working at 100% and all the stuff made is bought, as i understand it. As far as i know, that is the actual reason caltex only has it at a handful of servo's. There's a new huge refinery under construction, however it got pushed back to 2013 or something last i heard.

in other words, this has zero to do with carbon tax.

I don't think it will change much either, but it certainly can't do any harm.

What makes no sense to me is why is the Warrick outlet the only service station to provide it in all of QLD. Looking on their website Victoria has a heap of places to buy it from. Surely some outlets along the coast would be beneficial to the company.

I think you'll find that the government is rolling out Ethanol in fuels, in that its mandated a targeted a minimum amount to be sold (8% or 12% or something like that I think). Doing more faster would be impractical because almost noone is able to use the stuff. And of course since its a free market they can't force servo's to roll e85 out.

And even then, the biggest issue that there is currently is that there simply isn't enough production capacity in the country to make it. All the existing plants are working at 100% and all the stuff made is bought, as i understand it. As far as i know, that is the actual reason caltex only has it at a handful of servo's. There's a new huge refinery under construction, however it got pushed back to 2013 or something last i heard.

in other words, this has zero to do with carbon tax.

I may have got a bit carried away

I was more pointing out that the government is doing a massive cash grab rather then actually doing anything about global warming, which I dont think is really a problem anyway.

When Holden and Caltex first partnered up it was said that Every Holden dealership would have a Caltex with an Eflex bowser. This hasn't happened due to Government bureaucracy, some crap about cold start emissions. There has been no push because there are too many greenies that recon we shouldn't be growing fuel. I'm fat because of sugar ( laziness etc etc ) I'd much rather see it get used for fuel! Can they get the sugar out first???

Edited by RB 30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...