Jump to content
SAU Community

Recommended Posts

Clearout time again. All items in Brisbane, can post, pickup, or maybe deliver if you're not too far.

Stainless split dump pipe and mild steel 3in front pipe with o2 sensor bung. Good cond, all welds intact. Good n cheap at $60

post-78602-0-80994000-1345017455_thumb.jpg

6x stock r33 gtst 370cc injectors. Bought them off a member here a while back with the intention of getting them cleaned so I could just do a swap with mine one weekend, but ended up having the car off the road for a while and got mine done so never used these. $60 the lot

post-78602-0-05531200-1345017678_thumb.jpg

Brand new adjustable cam gear. Got a set of 2 off ebay but only used 1. This is the good kind with the outer steel gear not aluminium. proven (on both of my cars) to give noticeably quicker spool and no loss of power or driveability. $45 - never used.

post-78602-0-04064300-1345017869_thumb.jpg

R34 series 3 Garrett metal not nylon compressor wheel, ceramic rear, OP6 turbine housing turbo. $300

post-78602-0-73929600-1345018052_thumb.jpgpost-78602-0-89926300-1345018192_thumb.jpg

R33 series 2 stock turbo, no shaft play, comp and turbine intact, but bearing blown or flatspotted, shaft still spins but clicks, needs rebuild. Good to send in as exchange so you can still drive around in meantime. $60 for you my friend.

post-78602-0-76204600-1345018178_thumb.jpg

R34 side mount intercooler, good as the day it came out of the factory but with the normal scrapes etc of being on a car since it did come out of the factory. In other words, still in good nic with no real damage. $70. No pics as it's in my other garage but can send a pic if needed.

R33 side mount intercooler, vgc. $20. Same deal, in other garage at moment but can get pics if needed.

if you where in melbourne id be all over that dump/front pipe and cam gear.

prob take that op6 for my 33' if i had 300 bucks too.

i assuming by the look of the cam gear its universal for exhaust and inlet? i'm after an exhaust cam gear, if it suits rb25 s2 exhaust cam i'll take it.
...definitely suits this, as that's what my car is too, and I put mine on exhaust cam.
if you where in melbourne id be all over that dump/front pipe and cam gear.
I have alot of faith in Australia Post my friend :). Let's make this deal happen.

lets have a laugh, i need one, my job is boring as hell today. what the postage worth on that dumper then?

I have alot of faith in Australia Post my friend :). Let's make this deal happen.

you must be the only guy in the world that does! :rant:

well, maybe....only $$$ paid closes the deal for me. Had someone else ask about that too, should be no more than $30 boxed and posted but will find out exat costs on Mon if y'all want to pm me your postcodes so I can get some prices n whatnot.

Have I gone mad? Quite possibly...but crazy low prices have arrived

injectors $40 the set, $50 for the r33 turbo, $200 for the r34 turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...