Jump to content
SAU Community

Recommended Posts

hi all im new to these forums after perchasing my first nissan s2 r33 gtst 96 etc

and i need Your help! in acrireing pars for it

I Want:

Apexi Power FC Hand controller to siut my PFC

Passenger side door with electric window mirror and lock.

Wheels to fit r33 17" al least

Both Rear lights

S2 Front grill

Both S2Front headlights

Both Front standard Seats- have two buckets with rails for part trade?

Front bar and Rio/structure

Front Splash/underbody plates/plastics

Pasenger side Skirt

FS/ swaps /part trade

Bucket Seats asking $120 pair with rails or trade part trade for standard seats

2 K&N Filters need clean Offers

S1 front grill in purple met/sparkles

Link to comment
https://www.sau.com.au/forums/topic/407129-fsswapwtb-lotz-hr33/
Share on other sites

launceston, will drve to camble town distance at max.

seats have 1 tare on each but im sure it can be sowed up have rail fitted/ welded not sur if its legal

have grill i found out myne wes S2,

i have both doors, mirror drivers rear light on the way...

we have at Moonah Auto Parts

LH door complete in white $450

Both head light's $330 each

LH side skirt in white $125

Both tail lights..in white $125 each

these price's might be higher than other guy's on here, but i've gotta pay rent, wage's, insurance, et cetera et cetera

inbox if you want them

Cheers

Edited by Burgz32

Im keen for the seats ,(got cash) where abouts are you located?

I have a passenger door btw

in launie i can email you pics and get some post/ fraight cost if your keen, there cheep buckets but they hug well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...