Alcon Brake Package To Suit Nissan

[Risking]

I put this setup together for a customer who we have now upgraded to supercar callipers and a pedal box.

These are Alcon 6piston callipers (mono block construction) which are new. They have been fitvehicles vehicle during the build process and have been used to drive in and out of the workshop on one of my supercars for the last

week. They have seen no other work & are in perfect condition.

Come with ferodo pads

Rotors are 378mm 2 peice rotors with black anodized hats. They are a fixed design NOT floating. Rotors have 5x114.3 PCD drilled and a 5x120PCD. Center bore is to suit a skyline.

Machined billet adapters to suit the skyline. GTR required some minor mods to the upright to fit such a large calliper, currently have the smaller r32/33 sized bolts but I can drill them out to suit r34 larger bolts.

No brake lines but they use an m10x1.0thread so most aftermarket braid line kits from the GTR will fit.

I want $3000 for the setup which retails for $5500 from PWR without the adapters.

Photos via email no problem.

[woolls]

Sent you an email Brad

[Risking]

Replied Leigh.

[sycorb]

email sent