Jump to content
SAU Community

Recommended Posts

ok guys going through the garage got heaps of bits here just want it all gone!!!! buy a couple bits get something free etc

bare r33 shell, front hit, straight doors, all glass, cradle, tank, all sus apart from struts/springs

$150 take it away!!! this will be scraped if not taken soon

R33 PARTS

steering rack $50

clutch/accel/brake pedals/bkts $40

stock dump and front pipe $40

stock intercooler $10

stock intake pipe $5

series 2 silver wing $20

silver mirrors $20 pair

passenger window reg/rail $20

series 1 dash $40

handbrake boot great condition $20

pass window switch $10

steering column plastics $10

hicas ECU $30

s1 front grill $20

elec ariel $20

dash surround $20

air con set up, pump, condensor, lines etc (think its complete) $30

power steer res $10

interior lights x2 $5

parcel shelf $10

fan box for air/heater $10

air con box $10

rear pillar plastics $10 pair

drivers silver tailight 2 inch crack in the clear bit down the bottom $10

black outter door handles $10 pair

inner plastic door handles $10 pair

door locks for central locking $20 pair

steering coloumn controls washer stalk, headlight stalk $20

washer stalk $5

set seatbelts $20

stock castor rods/rear camber/toe arms $20 THE LOT

gear boot/metal ring that goes under the console $5 each

hicas unit $10 each

Stainless high mount manifold, heat wrapped $200

Greddy style intake manifold TB adapter already welded to it 280

80mm Throttle Body to suit ^^^^^ $140 or buy both $380

S14 PARTS

clutch slave cylinder $20

tailshaft $40

diff and half shafts $120

stock blue wing $10

carpet grey $20

RANDOM PARTS

Old school carrozzeria CD player and pop out T.V (with remote) 2 units with dbl din bacrket $40

GFB blled valve $30

Splitfire boost gauge (small) $10

mag wheel clock $20 ($49,95 sticker still on it)

used K&N filter with metal AFM adapter $20

set of small block and big block chev pistons/rods ossible reuse, was for a project $40 the lot

may post smaller items or pick up northern suburbs ADELAIDE

pm your number if you need a pic of something!!

Do you have the centre climate, and air conditioning part I really only need the faceplate of it, from the ntre of the dash, R33 s1 ??

Edited by cashie484
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...