Jump to content
SAU Community

Willall Transmission Oil? Diff Oil? Thoughts?


Recommended Posts

I am recently thinking to use Willall oil for my major service.

However my friend is talking me into not using it because he knows people who have a sensor fail in the gearbox after using Willall oil.

He also said that Willall oil causes the rear LSD to have excessive noice.

Has anyone experienced these? Or fine in a long run after using Willall oils?

Please advise whether it is good to go ahead or not.

Thanks

yea would love to have any opinions. Thanks in advance

Well thats easy. Take what your 'friend' told you, invert it, and theres your answer.

I wont go on about it, I will let those that have spent their own hard earned give their own real world experiences :)

Well thats easy. Take what your 'friend' told you, invert it, and theres your answer.

I wont go on about it, I will let those that have spent their own hard earned give their own real world experiences :)

Well I have done a bit of read up and most people seem to be happy with the WR oil apart from the warranty issue. I am still leaning towards using Willall oil after hearing what my friend has told me. However since I am new to the GTR world so thats why I am asking it here...

I will most likely be moving to the Willall transmission fluid after my warranty runs out.

My GTR tech is against it but I have heard good things about it.

I am currently on OEM. I am also getting my transmission fixed under warranty in a few weeks. It was already a bit of a battle with getting the warranty approved on OEM fluids (consisted of multiple visits to the HPC, sound and video clips, complaints to Nissan Australia etc). I do not if I would have had the same outcome if I was on Willall though?

I will most likely be moving to the Willall transmission fluid after my warranty runs out.

My GTR tech is against it but I have heard good things about it.

I am currently on OEM. I am also getting my transmission fixed under warranty in a few weeks. It was already a bit of a battle with getting the warranty approved on OEM fluids (consisted of multiple visits to the HPC, sound and video clips, complaints to Nissan Australia etc). I do not if I would have had the same outcome if I was on Willall though?

Could you elaborate what the symptons of your tranny were?

Could you elaborate what the symptons of your tranny were?

Loud rattle (sounds like marbles) during acceleration from standstill or slow speeds (between 900-1300 rpm). At idle, there is rattling but it's the 'normal' rattling and nothing like the ones in NAGTROC. There are no noises in park/neutral revving.

Gets annoying/embarrasing when I am in start/stop traffic or parking and I need to step on the accelerator often as the rattle appears.

Currently, there is prop shaft play but within tolerance. Noise appeared a month ago and getting louder. Have done 0 launches.

Ecl, sounds like your bell-housing needs fixing.

Have your Nissan 'tech' unbolt the prop-shaft from the back of it, then check the freeplay - it will be excessive

Martin, are you aware of the same bellhousing issue with the 2010's and beyond?

I have the usual rattles as well, and while stationary in gear only a very very slight rattle when the car is hot, but nothing noticeable above 2000rpms. Of course in P or N after the car is stationary and hot parked in my garage after a run, the rattle is fairly noisy, but not excessive like some youtube vids. I am however hearing a very very very faint higher pitched rattle somewhere in the back while driving @ 60+ kph on fairly smooth roads though (definitely not the brake pad rattle) - not sure if this is the seat belt housing issue others have experienced, or something else under the car. The Nissan tech mentioned it at the last service and said to keep an ear on it if it gets any louder they'll investigate further. Its not loud though, and certainly hasn't increased in volume - for all I know its probably just the fly wheel and normal sounds. My GTR has also had 0 launches (that I know of :P), so not currently too worried about it.

Edited by Wardski

Gets annoying/embarrasing when I am in start/stop traffic or parking and I need to step on the accelerator often as the rattle appears.

I hate the brake pad rattle, and get embarrassed when travelling thru the brisbane city and run over 10 bazzillion bumps in the road I can hear the clanging noise echo off the buildings.... farks sake..

Edited by Wardski

I hate the brake pad rattle, and get embarrassed when travelling thru the brisbane city and run over 10 bazzillion bumps in the road I can hear the clanging noise echo off the buildings.... farks sake..

Yeah, that is bad as well. I drive on the motorway where is basically a wall on one side and construction happening. I get to hear the rattle pretty much every day =(

Martin - yeah, Nissan is offering the replacement so it's all good =) hopefully they give me the newer model bellhousing. The dealer said they only have 1 part number that they order from. Also, they can now do it without dropping the engine.

I am recently thinking to use Willall oil for my major service.

However my friend is talking me into not using it because he knows people who have a sensor fail in the gearbox after using Willall oil.

He also said that Willall oil causes the rear LSD to have excessive noice.

Has anyone experienced these? Or fine in a long run after using Willall oils?

Please advise whether it is good to go ahead or not.

Thanks

I'm running all Willall fluids in an Alpha 12 setup that puts out significantly more power than stock. No issues at all at his end. I think your friend is relying on a lot of heresay and has not used the Willall fluids. Make the change, you won't be dissapointed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...