Jump to content
SAU Community

Recommended Posts

Skid Pans 14th Sep 2012 EC

Eastern Creek – Friday 14th September

wet skid pan and the skid circuit (fig 8/peanut)

if you have questions hit us up

[email protected]

1. Organizing Club: DRIVING SPORTS .INC.

2. Type of Event: Drift, Driver Training.

3. Date: Friday the 14th Sep 2012.

4. TIME: Scrutineering starts from 5:30 pm drift starts 6:30pm end 10:30 pm

5. Venue: eastern creek skid pan and fig 8

6. Track Surface: concrete (wet) Direction: clockwise

7. Event Format:

Skid circuit (fig 8 dry)

Cars will be divided into groups based on previous drifting experience In the event that a driver has not competed in this type of event before, he / she may be placed in the “First Timers” groups, to determine their appropriate group, proposed time of each session is 4 mins. All drifting will be non competitive.

Skid Pan (wet)

Cars will be divided into groups of 4 based on previous drifting experience

In the event that a driver has not competed in this type of event before, he / she may be placed in the “First Timers” groups, to determine their appropriate group

a) Maximum number of Driver entries for the wet pan is 32. Max for the fig 8 is 18 , you can swap when you like

b) Maximum number of Drivers per entrant is 2.

c) Entry fee $150.00 +$57.00 cams licence if u don’t already have one , $110 for full(gold) members

d) passengers $50 ( passengers on wet pan No cage , passengers on fig 8 need half cage minimum )

e) Opening date – open

f) Closing date – 14th Sep 2012

g) Entries will be accepted in order of receipt, accompanied by the appropriate entry fee.

h) Bank Transfers being the primary method of payment. Or cash on the day

A 1 Kg CAMS approved Fire extinguisher is recommended

To book follow this link http://www.drivingsp...trant-form.html

Fill in the entry form

if you would like to pre pay , bank transfers will only be accepted up to Tuesday the 11th of sep 2012

The Club has no facilities for Credit Card payments.

Here are the Bank details: -

Bank: Bendigo Bank

Account Name: Driving Sports

Account Number: 137911822

BSB Number: 633-000

Entry for spectators is $5 kids under 14 free with a guardian

This Event is a alcohol free zone

Friday night skids

See you there

Link to comment
https://www.sau.com.au/forums/topic/407986-skid-pans-14th-sep-2012-ec/
Share on other sites



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...