Jump to content
SAU Community

Recommended Posts

Vehicle: 1990 Nissan Cefiro, RB20DET silver top, Manual 5spd, 140,000kms

Contact: Dean 0401 682 270

SPECS

Interior/Exterior/Handling:

  • R33 Front Seats
  • Nardi steering wheel
  • Genuine Cefiro Floor mats
  • CD Player
  • Painted bayside blue
  • 17 inch work meshies with Federal RSR’s on front, Bridgestone RE050’s rear (may not come with car)
  • Height adjustable coilovers (unsure of brand at this stage)
  • Just jap front adjustable castor arms
  • Front & Rear strut braces
  • Front & rear adjustable camber arms
  • Solid rear cradle bushes

Mechanical:

  • Front mount intercooler (currently stock intercooler is fitted for RWC)
  • GTR exhaust custom fitted (nice and quiet)
  • Cushion Button Clutch
  • Mechanical 1.5 way diff
  • Walbro fuel pump
  • New Water pump
  • New rocker cover gasket
  • New rear main gasket

Other:

  • Never had one problem with this car, doesn’t burn any oil or water, no leaks, super reliable, never boosted, fantastic daily or potential track car
  • About 6 months reg

post-24745-0-40655100-1346629714_thumb.jpg

post-24745-0-57989500-1346629729_thumb.jpg

post-24745-0-81267300-1346629747_thumb.jpg

post-24745-0-14766600-1346629771_thumb.jpg

Edited by Dean_HR31
Link to comment
https://www.sau.com.au/forums/topic/408402-vic-nissan-cefiro/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...