Jump to content
SAU Community

Recommended Posts

18x10 +15 offset 265 all round,i was thinking of getting these 8mm or 10mm stick straight on to the hubs, would it f**k the 4WD puting these on at all??

cheersImage2

Edited by Turbo tommy

Ok.

My wheels sit flush, as in borderline flush. Seeing as you dont want to go past the guard then you will have to try and match those wheels or run too much and then you will have to run camber to get them into the guard.

My and your wheels are exactly the same, except for the fact that you 0.5" less on wheel width.

So by me using the good old offset calculator that seems to be a unheard mistery, you can easily see that you have 6mm space between your wheel and guard. Therefor if you want the flush look you need 6mm spacers. And im pretty sure you cant get those.

get some 5mm slip ons, maybe an 8 or 10 for the front if you run a bit of camber, and see what you think. theyre pretty cheap from sprints, autobarn etc.

any more than an a 10mm slip on and you will wanna get some longer wheel studs

you have to have the same width all round???? probs just go the 5mm stick ons all round, not alloy ones though ive heard badc things about them..Anyone know where to get the good stick on spacers from??

Edited by Turbo tommy

ok thanks for that,hadouken you think 5mm spacers should do the trick or should i go 8mm-10mm on my set up??yeh i dont want it to be un even would look crap.. just want it to look that more fatter stance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...