Jump to content
SAU Community

Recommended Posts

Hey guys well i have a rb25 powered patrol, going the 30DET root. I have the block here and the head. Heads off tomorow to get get the oil gallery plugged up. I need oil restrictors for the head yes? Where do i buy these from? Can anyone point me in the right direction? Yes ive searched and searched. But there are so many different opinions as to what head gasket i should go? Can someone link me to one so i can go ahead and purchase. Ive heard i should go ones thats got built in o rings?

Thankyou. I have about 3 guides im reading in front of me.

Keep in mind i live in a country town and there are no such places as performance engine builders. Ive found one place that will screw the hole up in the head

Thanks Zac

Link to comment
https://www.sau.com.au/forums/topic/408960-gq-rb30det/
Share on other sites

I got my restrictors from Lewis Engines. Ebay has a NZ place selling them super cheap : http://www.ebay.com.au/sch/i.html?_trksid=p3907.m570.l1313&_nkw=oil+restrictors+RB30&_sacat=0

I used 2 x 1.3mm restrictors and still ended up with oil in the catch can with 80psi of oil pressure above 5k.

If you're using an external oil feed for the VCT, I would suggest maybe going slightly smaller. Just my opinion, but there is a huge thread on oil restriction.

Regarding your second post - you MUST run restrictors no matter what. I didn't with my first build, and there was oil f**ken everywhere lol

Link to comment
https://www.sau.com.au/forums/topic/408960-gq-rb30det/#findComment-6525675
Share on other sites

So do you reckon i should go 1mm or 1.2mm? Later on ill be runner a bigger garret turbo and say around 14PSI.

Im currently reading the 357 page thread and i think im confusing myself more and more. Hence why i created this thread.

Will the standard rb30 oil pump be suitable? I plan on rev limiting it to 7k maybe even 6.5k. Also should i go a standard rb26 head gasket? 1.2mm i belive they are?

Thanks heaps for your reply mate, we have no performance shops here so yous are my best help.

Link to comment
https://www.sau.com.au/forums/topic/408960-gq-rb30det/#findComment-6525705
Share on other sites

So do you reckon i should go 1mm or 1.2mm? Later on ill be runner a bigger garret turbo and say around 14PSI.

Im currently reading the 357 page thread and i think im confusing myself more and more. Hence why i created this thread.

Will the standard rb30 oil pump be suitable? I plan on rev limiting it to 7k maybe even 6.5k. Also should i go a standard rb26 head gasket? 1.2mm i belive they are?

Thanks heaps for your reply mate, we have no performance shops here so yous are my best help.

I can sell you 2 x 1.0mm restrictors. That's what I have in my RB30/25 (with VCT).
Link to comment
https://www.sau.com.au/forums/topic/408960-gq-rb30det/#findComment-6527129
Share on other sites

Hey guys well I bought a rebuilt rb30/25 that's already assembled. Just bare engine. The heads s2 but doesnt come with coils or anything and my old s1 engine comes with nearly brand new coils ect. So can I just swap all that over to turn it into a S1

Link to comment
https://www.sau.com.au/forums/topic/408960-gq-rb30det/#findComment-6537461
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...