Jump to content
SAU Community

S/steel Spilt Dump For R33 In As New Cond, With O2 Sensor

hardsteppa

By hardsteppa,
in Classifieds

 Share

Recommended Posts

hardsteppa Grand Master

hardsteppa

Posted
Posted

Split-style stainless steel dump pipe for sale, to suit R33Gtst stock turbo and possibly others, R32? Used for exactly 752 km's ( I keep a log book of my works lol). The good bits - it's in brand new cond having done less than 1000k's, the turbine outlet has been perfectly port-matched and smoothed to maximise efficient flow, and the wastegate outlet has been bellmouthed and rounded to ensure no rough edges or angles and ensure smooth funnelling of exhaust gasses (yes I have time on my hands which is why I bother with the attention to detail). See pics. The bad bit - the exhaust temp sensor thread seized while trying to unscrew it so is stuck in there, but, it's an NGK/NTK sensor which has done 14,867k's (log book again) over about 19 months, bought new from Kudos Motorsports, so plenty of life left in it...so even that's a good bit, of sorts. Reason for sale; like most people on here, have read about 27,000 posts on "spilt dump vs bellmouth" and so bought this, then a JJR bellmouth just recently when they got them back in stock, to test for myself. Put the bellmouth on this weekend, and seems like there's not much/any difference between the two, and the other is already on the car, so....up for sale. Located in Brisbane so pickup preferred, but can post auswide as required. $160 with the O2 sensor, and new turbo/cat gaskets included. Check my previous sales posts, check my profile feedback, I sell good stuff at good prices, never had an unhappy customer. PM's welcome.

post-78602-0-87176500-1347870800_thumb.jpg

post-78602-0-26668000-1347870829_thumb.jpg

post-78602-0-08786000-1347870860_thumb.jpg

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...