Jump to content
SAU Community

Recommended Posts

1993 R33 GTSt Coupe - Black All high quality parts available! Wrecking whole vehicle all panels and shell. - RB25det S1 engine - Forged ACL race series pistons $1500 -RB25 5speed Manual conversion - everything included $1500 ( add $500 for Carbonetics Twin plate clutch and flywheel) - Turbo kit - Garrett GT35/40 (GT35r, GT3582) .82 rear .7 front, TIAL 38mm external gate screamer, Stainless high mount manifold, 3.5" dump heat wrapped, all oil and water lines. (tight rocker clearance should fit r31-r34) $2100 - Greddy (genuine) Forward facing plenum, Throttle body, Greddy washer bottle, Greddy front mount IC and all piping $1500 - Top feed fuel Injector kit to suit manifold 880cc, twin entry rail -6an return $650 - Trust 3" cat back exhaust $350 - 4" cat back (spare) $300 - z32 AFM + HKS pod and wiring loom $250 - 1500hp Fuel System - 2x Genuine Bosch (brand new) 044 external pumps, Bosch 040 intank pump, 2lt Surge tank, speed flow fittings $600 - APEXi Power FC with Hand Controller $1000 - SARD Fuel Pressure Reg $80 - GREDDY Type-S Coil Over Suspension $800 - CUSCO Radius/Castor Arms $150 - HICAS lock bar $50 - Adjustable Rear Camber arms $100 - Diff - shimmed tight, 6 bolt $250 - Diff - shimmed tight, 5 bolt $250 - Momo Race Leather steering wheel and boss kit $100 - Dash cluster - White face $200 - Full 5 stud conversion - Hubs, Discs (dba4000 front), Calipers, pads, knuckles, LCAs and handbrake setup. $800 - 400r Side Skirts $150 - M front bumper (needs work) $75 - M Rear pods $120 - Boot with drift lip $150 - STD boot $50 - Nismo front strut brace, master cyl brace. $150 - 18x8, 18x9 GMAX Defiant with Tyres $800 - 265/30/18 x2 Federal 595 SS 95% $200 - Contact for panels All prices are Neg! Every thing available!!! I have probably missed heaps! If you want something let me know Shell will be available with plates, No defect! Can SMS pics!

Thanks mate! Just about to do the same. Only have iPad ATM and it's not real easy to post anything but replys.

Just post up your contact number etc otherwise the mods will delete it or lock it on you :)

Contact number 0438 422461

I have been asked by a few people why I'm parting it out. Basically I have lost interest. I have a young family and enjoy my fishing too much. I haven't driven the car for ages, as I was to scared to get it defected. I considered selling it whole but saw what they were worth second hand and decided I would make more cash parting it out. That is the whole story.

Price review on a couple of things:

- Turbo kit - Garrett GT35/40 (GT35r, GT3582) .82 rear .7 front, TIAL 38mm external gate screamer, Stainless high mount manifold, 3.5" dump heat wrapped, all oil and water lines. (tight rocker clearance should fit r31-r34) $1650

- Diffs $150ea

Hey mate, interested in the cusco caster rods, adjustable rear camber arms and the nismo strut brace, can you pm me some pics?

Hey guys/girls,

I don't seem to be getting new PMs through, can reply to conversations but not receiving new PMs. If you can Call or SMS my mobile I can get back to you (0438 422461)

Injectors gone. Still have twin entry fuel rail!

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...