Jump to content
SAU Community

Recommended Posts

yes they do , can confirm the bracket is the same for the hand brake on 33 too . with the cross member , i vaguely remember 33 fit straight in , but i can't remember if that was with the 33 box or what , but there is a crossmember that bolts to the factory holes from an auto to manual conversion with 20 box

Yeah toffy that would be the 'B' cross member. It's just like I described I needed; the A (or C, seemingly the same) to be inverted. Perfect fit.

Danny I have the pipes but not with a BOV on them. Would like one with a BOV already.

im about to take on all this conversion with my laurel haha gonna be turning to all you guys for help one day soon haha

question what crossmember fits a rb25 gearbox as my laurel has a 25 in it ?

  • 6 months later...

what been happing with this car??? must say one of my fav laurels

I bought it! Found this thread while randomly searching for bits of Laurel information. Turns out I have an SAU account for some reason. Was good to see the posts here line up with Tom's comments when I checked out the car.

Anyway, I'll be able to use this now cause I've got plenty of questions already.

The first one being has anyone swapped out the horrible front door 6x4's for some normal 6's/6.5's? They look to be extremely shallow mount and I haven't really looked at clearance on a retracted window or on the inside of the door trim...

i have 6.5" component speakers in my laurel. i just cut the plastic housing away and made it fit 6.5" speakers

Didn't run into any clearance issues with the magnet and the window while down or anything like that? It looks a bit squeezy, are they reasonable big deep woofers?

Oh and did you find any best places for the tweeters or just chuck them on the dash? I'll check out your thread now, thanks.

nah wasn't to bad. my components have the tweeters built in. but id avoid putting the tweeters to high. it can be very over powering and mess with the sound stage, try and have them as close to the woofers as possible.

in my r31 coupe i actually got a hole saw and cut holes just about the woofers and flush mounted them. looked like they were factory fitted and sounded amazing

Thanks Danny. Yeah I've spent plenty of time with SQ systems in other cars just never had to deal with a 6x4 before! I will trim the mounts and hopefully they can deal with a 6.5'' without needing MDF spacers or anything. I'm more a fan of mounting the tweeters high and then using the crossovers to dim them down if they are super bright and horrible.

Sam the car as I bought it has a big ding in the driver's side rear door so it's not in the best nick for photos! I had planned on getting it fixed straight away and buying some new coilovers and rims, but the car I was selling got stolen so now I have no money for any of that stuff, really frustrating. I'll take some snaps (on the passenger side :P ) soon

  • 2 weeks later...

yeah fair call mate.

shouldnt have to much issue gettin 6.5" to fit in there.

Had a go at it, the 6.5's were fouling on the little water cover type guard on back of the plastic mount. realised they weren't gonna have enough plastic to screw into solidly anyway, so the 6x4's remain in haha.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...