Jump to content
SAU Community

Recommended Posts

Genuine R32 & R33 GTR Keys

-=Transaction Instructions=-

All transactions are conducted via a portal to our website, usually indicated by the x-click-but22.gif button. Upon clicking this button a new browser window/tab will be opened and the item added to your shopping cart. At this point I would recommend logging (located within "My Account"), this will ensure that the item is added to the permanent cart attached to your account; otherwise it will be lost at the end of the session.

If you haven't already created an account on our website you can do so now by clicking here

Please Note:

  • If you have any trouble you can contact me by either PM or E-mail.
  • The pricing below does not include delivery, unless otherwise stated; this cost will depend on location and is automatically calculated on our website at checkout.

Genuine-Nissan-Key-Blank-GTR-KEY00-00185-Nissan-Skyline-R32-GTR-R33-GTR-RB26DETT.jpg

Price: On Special For Only $45.90 x-click-but22.gif

Nissan Blank Key (KEY00-00185) - Nissan Skyline R32 GTR (RB26DETT) & R33 GTR (RB26DETT).

This beautifully finished chrome plated, genuine Nissan, GTR badged keys would make a great addition to any Nissan fanatic's key ring. Although listed for the R32 & R33 GTR this key will also suit the A31, C33, C34, R32, R33, S13, S14, WC34, Z31 & Z32 chassis platforms.

Link to comment
https://www.sau.com.au/forums/topic/411775-genuine-r32-r33-gtr-keys-only-4950/
Share on other sites

  • 1 month later...

Hi Terry,

The R34 uses a different key to earlier models. We do however have units that do suit the R34 range, they can be found on our website using the following link:

Key (Blank, Non-Transponder) - Genuine Nissan Skyline R34 GTR (RB26DETT)

Genuine-Nissan-Key-Blank-GTR-H0564-AA410-H0564-AA411-Nissan-Skyline-R34-GTR-RB26DETT.jpg

Hi Again,

I've bought things off you before and your service is outstanding.

Thanks for the above info.

I was wondering if the R33 GT-R "blank" prior to cutting is the same.

I was enquiring so that my wife can get into the boot (or if I lock my R34 GT-R key inside).

She thinks the R33 GT-R "blank" looks pretty. ;)

Thanks for the kind words Terry, it's always great to receive feedback from customers.

Haha, can you blame here being attracted to shiny things? They're a good looking key however sadly the issue is deeper than cosmetics; the actual blade is different.



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...