Jump to content
SAU Community

Recommended Posts

Hey guys,

Did some cleaning up over the weekend and found some stuff I no longer need.

Parts as follows:

Fuel System:

Bosch 044 pump, 2L surge tank, braided lines and speed flow fittings.

To suit R32 GTSt mounted in the boot. $350

post-53833-0-46478600-1350807550_thumb.jpg

HICAS lock bar:

Lock bar with ends and boots to suit R32 GTSt in very good condition. $50

post-53833-0-16268200-1350807568_thumb.jpg

R32 GTR rear swaybar:

Good upgrade for GTSt and Silvia owners on a budget. $50

post-53833-0-46314100-1350807528_thumb.jpg

R32 rear strut brace:

Good condition, suits Silvia as well. $50

post-53833-0-50182700-1350807588_thumb.jpg

R32/Silvia Castor arms:

With adjustable poly bushes, in very good condition. $100

post-53833-0-29636500-1350807627_thumb.jpg

R32 GTSt Front LCA's:

Straight and in good condition. $100

post-53833-0-05064200-1350807779_thumb.jpg

Rb25det standard intake manifold:

Complete minus injectors. $100

post-53833-0-99525800-1350807898_thumb.jpg

R32 GTSt set of standard rear arms:

All in good condition. $50ea or $200 for the lot

post-53833-0-48625600-1350808151_thumb.jpg

R32 Thick alloy radiator:

Fitted with EL Falcon fans, this setup cooled really well never saw over 90 degrees (track conditions)

This setup suits R32 GTSt with Rb25det fitted and is a tight squeeze. $250 for setup, $150 for radiatior, $100 for fans

post-53833-0-45656000-1350808347_thumb.jpg

post-53833-0-64323600-1350808368_thumb.jpg

R32 Rear seat belts:

Complete set of rear seat belts, as new condition. $100

post-53833-0-62539700-1350808728_thumb.jpg

GENUINE TRUST T67 25g 10cm Kit:

Suits Rb25det, Complete kit, all items are in good condition.

Turbo & Gate have been checked and are mint.

Only selling this setup because I have decided to go bigger.

Some say this is the perfect size turbo for the RB25det and are good for over 300kw atw with mild lag.

Kit inculdes Genuine Trust T67 25g 10cm turbo, Genuine trust high mount manifold, Genuine Trust wastegate, Genuine Trust dump pipe and screamer pipe and Genuine Trust oil lines. $2600

post-53833-0-71901800-1350808828_thumb.jpg

All prices are ono, items located in Wodonga VIC but i am in Melb a lot so i can organise to meet with Melb buyers.

Happy to post anything at buyers expense.

Cheers

Campbell

0421840982

Link to comment
https://www.sau.com.au/forums/topic/412027-reamed-garage-sale/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...