Jump to content
SAU Community

Recommended Posts

have a few RB and SR parts here i have no use for, to get a quicker reply text me on 0421 710 904, i will ship items.

located in Brisbane.

RB26 intake pipes, one has HKS silicon on it so maybe they are HKS? come with a motor i used for a conversion- $50

20121101_084846.jpg

4x bosch indy white 1600cc injectors- used them with methanol and E85 and had no problems- $220

20121101_083709.jpg

RB30 Blue fuel rail suit 14mm top injectors brand new-$80

20121101_084038.jpg

few sets of RB26 intake and outlet pipes. im also a fabricator so if anyone would want these i can weld the baffle plate in there, if anyones intrested just text or PM me about it and we will work it out.-$ ?

20121101_084919.jpg

i have RB26, RB25 and SR20 stock exhaust manifolds- $50 each

20121101_090838.jpg

GTR diff center and 31 spline stub axels, removed as i put a 2 way in my diff- $100

20121101_090727.jpg

i have a gearbox mount and custom 1 peice tail shaft rated to handel over 600hp for a 180sx / S13, this is to suit a RB with a GTR box ( had transfer case cut off) much cheaper gearbox then a RB25 and its the same internals just 1/3 of the price..- $350

20121101_085127.jpg

RB25 manual strater motor- $60

20121101_084949.jpg

RB25 turbo outlet pipe which has been chrome dipped- $40

20121101_085232.jpg

SR20 coil packs- $70

20121101_084928.jpg

1JZ full gates belt kit including timing belt and oil filter never used- $50

20121101_084940.jpg

Link to comment
https://www.sau.com.au/forums/topic/412885-parts-cleanout-performance-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...