Bolting On Turbo And Manifold

[Philr32]

Hi all,

I've just replaced all the exhaust studs and manifold studs on my rb25det. My question is when I'm bolting the turbo back on is there anything special I need to know? Especially seeing as it lost some coolant and oil (which I will top up) but will there be air in the lines that I need to bleed to get out or something? If so just let it run for a bit with radiator and oil caps off and it will just come out? And is there any other special process or anything, or is it just bolt up reverse to taking it off?

Thanks in advance

[89CAL]

Oil will bleed itself just make sure you check and top up after you startup the car

Coolant, yes. Fill the radiator off, crack the bleed screw and leave it running with the radiator cap off. top up with coolant when the thermostat opens and you can see coolant flowing through the radiator. make sure you fill it and no more bubbles come out of the bleed screw